User`s manual

Software Installation- 17 -
English
nView Display Settings properties *
 nView allows you to connect separate displays to single
graphics card.
• nView Display mode: select your preferred nView display
modes here.
Options: Single display/ Clone/ Horizontal Span/
Vertical Span/ Dual View
• Primary/Secondary display: select a single display or
display pair. The selected display combination will appear
in the graphical representation below.
• Make this the primary display: Specifies that the display
corresponding to the icon you selected above is the
primary display.
• Click Apply to apply settings or click OK to save settings.
 If TV is chosen as the display, you will need to select the
proper TV format. To do this, click Device Settings followed
by Select TV format. Select the format for your television
and then click Apply followed by OK.
You can select other properties from the pop-out menu.
 This page shows the Adapter, System and
Driver version information.
GeForce 7950 GT properties
The following section introduces display properties settings using the classic NVIDIA control
panel interface as the example.
Display Model GV-NX795T512H-RH
Matrix CRT+TV Yes
CRT+DVI Yes
DVI+TV Yes
DVI+DVI Yes
"*" Only Single display mode is
available when SLI mode is enabled.