User`s manual

Appendix- 29 -

English

5. Appendix

5.1. How to Reflash the BIOS in MS-DOS Mode

1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive

2. Restart the computer in MS-DOS mode. (For Windows 2000/XP, you need a startup disk to restart

the computer in MS-DOS mode.)

3. Change the command prompt to A:\>.

4. To back up the current BIOS, at the A:\> prompt, type[BIOS flash utility name]

-s [BIOS file name] (example: gvf11 -s X795T9HR.F1) and press Enter.

5. To flash BIOS, at the A:\> prompt, type [BIOS flash utility name] -p [BIOS

file name] (example: gvf11 -p X795T9HR.F2) and press Enter.

6. Wait until it's done, then restart your computer.