User Manual

3
2. Hardware Installation
Now that you have prepared your computer, you are ready to install your
graphics card.
Step 1.
Locate the PCI Express x16 slot. If necessary,
remove the cover from this slot; then align your
graphics card with the PCI Express x16 slot, and
press it in firmly until the card is fully seated.
☛Make sure that the gold edge connector of the graphics card is securely inserted.
Step 2.
Replace the screw to fasten the card in place, and
replace the computer cover.
※ If there are power connectors on your card, remember to
connect the power cable to them, or the system will not
boot. Do not touch the card when it’s operating to prevent
system instability.
Step 3.
Connect the appropriate cable to the card and the display. Finally, turn on
your computer.
DVI-I DVI-D HDMI Mini HDMI
(Dual Link) (Dual Link) Monitor Monitor
D-sub DisplayPort Mini DisplayPort
Monitor Monitor Monitor