Copyright © 2010 All Rights Reserved - Printed in China Booktop M1022 User's Manual Original Issue: 2010/12 This manual guides you in setting up and using your new Booktop PC. Information in the manual has been carefully checked for accuracy and is subject to change without prior notice. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without prior written consent.
Safety Instructions Use the following safety guidelines to help protect yourself and your Booktop. English I When Using Your Booktop M1022 Computer CAUTION: Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can build up in the base. Allowing sustained contact with the skin can cause discomfort or a possible burn. • Do not attempt to service the Booktop yourself.
Booktop M1022 SERIES USER’S MANUAL NOTICE: When taking your Booktop from a colder to a warmer environment or vice versa, allow your Booktop enough time to adapt to the new environment before turning on power. • When unplugging the power cord, please make sure that you pull on its connector or on its strain relief loop, and not on the power cord itself. As you pull out the connector, please ensure that it is pulled out evenly in order not to bend its connecting pins.
Regulatory Notices English III Federal Communications Commission Notice RF exposure This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Booktop M1022 SERIES USER’S MANUAL CE Notice (European Union) • EN 55022 — “Limitations and Methods of Measurement for the Radio Interferences of Information Technology Equipment.” • EN 55024 — “Information technology equipment - Immunity characteristics - Limits and methods of measurement.” • EN 61000-3-2 — “Electromagnetic compatibility (EMC) - Chapter 3: Limits - Section 2: Limits on the harmonic current emissions (Equipment input current up to and including 16 A per phase).
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used battery according to the manufacturer’s instructions. English V BSMI Notice (Taiwan Only) Most Booktop computers are classified by the Bureau of Standards, Meteorology and Inspection (BSMI) as Class B information technology equipment (ITE). The symbol above must be attached to the product indicating compliance with the BSMI standard.
Booktop M1022 SERIES USER’S MANUAL English VI
English Preface VII Congratulations on your purchase of a Booktop computer! Your new Booktop features the most innovative features in portable computing technology. It combines state-of-the-art ergonomics with sophisticated architecture, providing you with a personal computer that is compact, powerful, and easy to use. Designed for a wide range of general, business, and personal productivity applications, this Booktop is an ideal choice for use in the office, at home, and on the road.
Booktop M1022 SERIES USER’S MANUAL Content Chapter 1 Introducing Your Booktop M1022 1.1 Panoramic View........................................................................ 2 1.2 M1022 Left Side....................................................................... 3 1.3 Right Side................................................................................. 3 1.4 Cover Side................................................................................ 4 1.5 Bottom Side........................
Booktop M1022 SERIES USER’S MANUAL This chapter will show you how to operate your M1022 SERIES Booktop M1022 computer, including connecting the AC adaptor, turning the computer on/off, using touch-pad, keyboard, hot keys, battery, and so on. If you are new to computers and to the operating system, this chapter will guide you through some of the new exciting features.
1.1 Panoramic View No. 1 English 2 2 3 11 10 6 Function Web camera Built-in 1.3M camera. 2 LCD To display the content output form the system. 3 Speakers The built-in dual speakers output for stereo sound 4 Power Button Turns the computer on and off, or resumes whenever it is in suspend mode. 5 Six system LED indicators Six LED lights show the status of the Booktop. From left to right : à3.
Booktop M1022 SERIES USER’S MANUAL 1.2 M1022 Left Side 1.3 Right Side 1 3 4 5 2 3 4 5 English 1 2 3 No. Item Function 1 Kensington Lock Connects a Kensington-compatible security lock. 2 D-SUB To connect an external monitor. 3 Air Vent To vent heat from Booktop M1022. 4 Docking Station Connector To connect the Docking Station. 5 Docking Station Guider To fix the Docking Station. No. Item Function 1 Media Card Slot Media Card Reader.
1.4 Cover Side 1.5 Bottom Side English 1 1 3 4 2 No. 1 Item Cover Function To Protect the Booktop M1022. No. Item Function 1 Battery Pack Replaceable battery that serves as Booktop M1022 power supply. 2 Memory Door To upgrade the DDRII-Memory SoDimm. 3 HDD Door To upgrade the SATA HDD.
Booktop M1022 SERIES USER’S MANUAL 1.6 Status Indicators Icon Item Function WWAN on/off status. Bluetooth Bluetooth on/off status. (Optional) WLAN Status Wireless on/off status. HDD Booktop M1022 is reading from, or writing to hard disk. Battery status Power status Blue off Recharging is finished or Booktop M1022 is not powered by AC adapter. Blue on Battery is in recharging. Blue off System is turned off or in hibernation mode. Blue flashing System is in Standby mode.
English 6 1.7 Turning Your Booktop M1022 On and Off 1.8 Keyboard Functions Turning on the power Open the Booktop M1022 lid, press the power button for one or two seconds. The power indicator will glow blue once the computer is powered on. Booktop M1022 computer is equipped with a standard typewriterlayout keyboard and has extra features. Turning off the power If you are not going to use your Booktop M1022 computer for a while, it is best to turn off its power.
Booktop M1022 SERIES USER’S MANUAL Fn+F6 Use Fn key combined with other keys to activate, close or set special functions. These combinations are also called Hot Keys. To use the Hot Keys, press and hold down together with the keys described below: Touch Pad Enabled/Disabled Press this key combination to enable/disable the Touch Pad function. Fn+F7 Mute Press this combination to mute/unmute the output of the audio signal.
1.9 Using the Touchpad English 8 1.11 Using the Audio The built-in touch pad is a PS/2-compatible pointing devise that senses movement on its surface. This makes the cursor responds as you move your finger on the surface of the touchpad. The central location on the palm rest provides optimum comfort and support. The following teaches you how to use the touch pad: Move your finger across the touch pad to move the cursor.
Booktop M1022 SERIES USER’S MANUAL 1.12 Using the Wireless LAN (WLAN) 1.13 Using the Battery Pack You can use Wireless LAN to connect to the network and use the Internet in your home and office, so there is no need anymore to pull cables or use wires. Booktop M1022 computer is designed to operate with one of the following power sources: You can use the Function key (1.8 Using the Launch Keys) or Fn combination keys (1.8 Keyboard Function) to turn on WLAN.
English 10 Replacing the Battery 1.14 Connecting the AC Adapter The battery will gradually weaken over time. We recommend that you replace your battery when you notice a significant decrease of battery capacity. The AC adapter converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and outputs power at 12V, (12V, 3.0A for M1022), allowing you to use your Booktop M1022 computer in almost any region globally.
Booktop M1022 SERIES USER’S MANUAL 1.15 Installing M1022 Device Drivers 1.16 Operating Temperature If your Booktop M1022 Computer already has an operating system installed, it is best to install all necessary device drivers in order for the hardware to properly function. Ideal Operating Temperature : 10ºC to 40ºC 1. You can find the Utility Driver CD like the one shown below: 2. Put the CD into the CD R-W or DVD-RW (optional) Drive. An Auto Run installation screen will appear.
English 12
Booktop M1022 SERIES USER’S MANUAL English Chapter 2 Battery 13
2.1 Battery Pack English 14 Your Booktop M1022 is equipped with a high-energy rechargeable Lithium Ion (Li-Ion) battery pack. Battery life will vary depending on the product configuration, product model, applications loaded on the product, power management settings of the product, and the product features used by the customer. As with all batteries, the maximum capacity of this battery will decrease with time and usage. 2.2 Recharging The Battery Pack 2.
Booktop M1022 SERIES USER’S MANUAL I did not use my spare battery for months. I have a problem with recharging it. 2.4 Battery Maintenance To maintain the battery pack's maximum capacity, you should occasionally let the Booktop M1022 deplete its battery power completely before recharging. To carry out a complete depletion of the battery, disconnect the AC adapter and let your Booktop M1022 consume the remaining battery power. To speed up the depletion, use the HDD as much as possible.
2.7 Removing The Battery Pack 2.8 Connecting System To AC Adapter English This battery pack can easily be removed and replaced. Make sure that the computer is properly shutdown before changing the battery pack. If you would like to change the battery pack while power is on, make sure this battery pack is not the only electrical source to the system unit. Follow the steps below to remove the battery pack. 16 1 2 3 1 Make sure the system is properly shutdown.
Booktop M1022 SERIES USER’S MANUAL 2.9 Battery Capacity Inspection When system is under "Standy By", "Hibernation" and "Power Off", you can press the right touchpad button to inspect the battery capacity. English 17 The LED indicators will show the battery capacity status.
English 18
Booktop M1022 SERIES USER’S MANUAL English Chapter 3 The Docking Station (Optional) 19
3.1 The Docking Station Instruction English 20 3.2 Docking Station Panoramic View The creation of this device provides the Booktop with a vertical Docking base for expansion use. The Docking Station enables an external connectivity solution to connecting to an external display and to common computer peripherals as the portable laptop computer is well placed on the device. In order to avoid any of the discomforts causing any ill-human factors arising from constant use.
Booktop M1022 SERIES USER’S MANUAL 3.3 Rear View 6 1 5 2 3 4 1. D-SUB 2. DC-in Jack 3. USB Port 4. Line Out 5. USB Ports 6. LAN RJ45 Jack English Note: Battery Indicator Button: 1. When you press this button, you can show the battery capacity by the six dynamic LED Indicators on the Booktop unit. A dynamic LEDs display the battery's capacity whatever the battery is in a charging or discharging mode.
3.4 Mounting The System Unit Make sure connectors from both sides are well aligned. System unit is mounted when the two connectors are fully engaged as shown. English Docking Connector 22 Reverse the above steps to un-mount the system unit. Put the Booktop unit in the Docking Station as shown. Note: 1. The Docking Station design supports the hot plug-and-play standard. 2. You can Boot up or shut down the system by pressing the "Power Button" on the Docking Station. 3.
Booktop M1022 SERIES USER’S MANUAL The BIOS Setup Utility is a hardware configuration program built into your Booktop M1022’s BIOS (basic input/output system). Your Booktop M1022 is already properly configured and optimized, and you do not need to run this utility.
English 24 4.1 Using the BIOS Setup Utility F7/F8 Change Values Your Booktop M1022 has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the computer. This chapter explains how to use the BIOS setup utility. Enter Select ► Sub-Menu BIOS Setup Menu The BIOS setup Utility allows you to configure your computer’s basic settings.
Booktop M1022 SERIES USER’S MANUAL 4.2 The Main Menu F02 •••••••••••••••••••••••• Notice: The BIOS of your Booktop M1022 has been initialized to best settings. It’s advised you not to change it if not so necessary. English •••••••••••••••••••••••• Tips: For more information about Menu and Keys, please refer to the help information of respective selection. There may be difference of BIOS setting between different versions of BIOS of different batch of Booktop M1022 produced.
4.3 Advanced Menu English 26 Boot Configuration : Select Power-on state for NumLock on/off. IDE Configuration : Select the hard disk drive type installed in your system as IDE/SATA mode.
Booktop M1022 SERIES USER’S MANUAL 4.4 Security Menu 4.5 Boot menu English 27 Set Supervisor Password A supervisor password must be set before a lower-level user password can be set. After selecting Change Supervisor Password, press Enter. You will be prompted for the new password, and then again to verify it. Type in 6 or fewer keystrokes. If you make an error, press Esc to start over.
4.6 Exit Menu English 28 Exit Discarding changes Exit system setup and without saving your changes. Load Optimal Defaults Load Optimal Defaults. Discard Changes Discard Changes.
Booktop M1022 SERIES USER’S MANUAL English Chapter 5 Introduction to Smart Manager 29
Volume: Press + and - icons to adjust the volume. Mute: Press this key to enable/disable mute mode. English Brightness: Press + and - icons brightness. 30 to adjust the display Display Rotation: Press this key to rotate the display direction. Due to variations of Smart Manager versions, the interface, icons, sequence and functions might be different comparing to the guide. Please operate the Smart Manager by the version preloaded.
Booktop M1022 SERIES USER’S MANUAL LCD/Video-out Switch: Press this icon to set LCD and Video-out simultaneously mode. Press this icon to set Video-out mode only. Power management mode: Press this icon to activate the power plan to power saver mode. Press this icon to activate the power plan to high performance mode. Press this icon to activate the power plan to balanced mode. Press this icon to activate the power plan to presentation mode. (Windows XP only) English Press this icon to set LCD mode only.
English 32 Chapter 6 Troubleshooting / Q&A This chapter contains advice and solutions to a few basic problems you might encounter when you use the Booktop M1022. Please refer to this chapter and follow the instructions to solve any problems.
Booktop M1022 SERIES USER’S MANUAL 6.1 Troubleshooting AC Adapter Trouble Solution Make sure the AC adapter is well connected to the power source and Booktop M1022. No power supplied to Booktop M1022 Check the cable and plug to make sure they are OK. If they are broken, please contact your local dealer ASAP. Battery pack Trouble Solution The remaining power in battery pack may be No power supplied not enough to power on the machine. Connect to Booktop M1022 AC Adapter to recharge it.
English 34 WARNING: Please pay attention to the following information regarding the battery pack: 1.Be sure to recycle the waste batteries property. 2.Do not place the batteries near high-temperature locations, fire source or in burning fire as this may cause the batteries to explode 3.Do not assemble/disassemble /modify the batteries without authorization. 4.Use the battery pack provided by the original manufacturer only.
Booktop M1022 SERIES USER’S MANUAL 4. The LCD screen is the most fragile component of the Booktop and is prone to damage under external forces. Do not place any object on the keyboard or between the keyboard and the screen to prevent damage to the LCD screen. 5. When traveling with GIGABYTE Booktop M1022, place it in a special case in a tidy manner as far as possible. Excess objects may squeeze the machine and therefore damage the LCD screen. 6.
Audio LAN Trouble Check the setting of sound volume of software. English No sound emitted Trouble Solution Adjust sound controller. Check if the ear phone is firmly connected. Check the Devices Manager of Windows. Be sure the Sound function has been activated and isn’t interfering with other hardware. 6.2 Q&A My computer switches to hibernation mode much too quickly, and I have to constantly hit a key or move the mouse to bring back the screen.
Booktop M1022 SERIES USER’S MANUAL What kind of external microphone can I use with my Booktop computer? You will need to use a self-amplifying microphone. Double click on the Speaker icon on the task bar. Then, under Microphone Balance, check the Mute box. Because of a software problem, I was unable to shut the computer down from Windows, I pressed the power button to power off the computer, but it didn’t work.
English 38 Caution • Unplugging or ejecting a device that supports safe removal without first using the Safe Removal application to warn the system can cause data to be lost or your system to become unstable. For example, if you use Safe Removal, however, you can warn the system before you unplug or eject a device, preventing possible loss of data. Note • For removable storage devices that can safely be removed while the system is on, the system disables write caching by default.
Booktop M1022 SERIES USER’S MANUAL English 39
English 40 Appendix I Specifications
Booktop M1022 SERIES USER’S MANUAL Processor Intel® Atom 1.6GHz N270 (Optional) Intel® Atom 1.66GHz N280 Core Logic Intel® 945GSE Memory DDRII SO-DIMM X 1, Max 2 GB For the compatible HDDs & RAMs by model, please refer to GIGABYTE AVL List Video Interface Intel® 945GSE Display 10.1”LCD panel / WSVGA 1024x600 10.1”LCD panel / WXGA 1366x768 Hard Disk Drive 2.5” ,9.
English 42 Appendix II Recovery Update Notices
Booktop M1022 SERIES USER’S MANUAL How to restore your Booktop to factory defaults Time to restore: When your computer is infected by virus or there is any other reason that you want to restore your operating system to the factory defaults. 3. There are four options on the menu: "RESTORE" (to restore data), "ABOUT" (to display XR3 software related information) and "REBOOT" (to cancel the recovery and restart the computer).
5. After all the selections have been made, the screen shows "RESTORE NOW…", indicating your computer is now recovering the operating system data. When the recovery is complete, the computer will automatically restart and restore to factory defaults.
Booktop M1022 SERIES USER’S MANUAL This appendix will list our service centers for your Booktop M1022 computer.
Taiwan GIGABYTE Service Center English 6F, No.136, Jien-Yi Rd., Chung-Ho, Taipei Hsien, Taiwan. TEL: +886-2-8227-6136 FAX: +886-2-8227-6163 WEB Address (English): http://www.GIGABYTE.com.tw/ WEB Address (Chinese): http://www.GIGABYTE.tw/ 46 U.S.A. G.B.T. INC. TEL: +1 (626) 854-9338 FAX: +1 (626) 854-9339 WEB Address: http://www.GIGABYTE.us China G.B.T. TECH. TRADING CO., LTD. WEB Address: http://www.GIGABYTE.com.
Booktop M1022 SERIES USER’S MANUAL Warranty Clause English 1. The warranty of the products of GIGABYTE shall commence from the date specified on the invoice issued by the dealer. Consumers shall keep the purchase invoice properly to safeguard the legal rights and interests. 2. To identify the warranty period of various products, please visist related webpages of GIGABYTE at http://service.GIGABYTE. tw/ for query. The dealer shall be responsible for the warranty provided or sold by the dealer itself. 3.
12. Considerate reminder !!! Be sure to backup important data before sending the product for repair. GIGABYTE is responsible for the repair and test of the product only and will not provide services such as data backup, etc. GIGABYTE will not assume responsibility for any data loss during the repair process.
