Motherboard GA-7N400S-L Instruction Manual

GA-7N400S(-L) Motherboard - 34 -
English
2-3 Advanced Chipset Features
System Performance
Normal Set system at the most stable settings. (Default value)
Turbo Use overclock settings for higher performance but with higher risk of instability.
Manual Allows full customization of performance options.
FSB Frequency
100MHz Set FSB frequency at 100MHz. (Default value)
133MHz Set FSB frequency at 133MHz.
166MHz Set FSB frequency at 166MHz.
200MHz Set FSB frequency at 200MHz.
Memory Frequency
(Note)
By SPD Set memory frequency by SPD. (Default value)
50% ~ 200% Set memory frequency manually.
Auto Set the best memory frequency for system.
Resulting Frequency
The value depends on FSB/Memory Frequency settings.
AGP Frequency
Normal Set the best AGP frequency for system. (Default value)
50MHz ~ 100MHz Set AGP frequency manually.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced Chipset Features
System Performance [Normal]
FSB Frequency [100MHz]
x Memory Frequency By SPD
Resulting Frequency 266MHz
AGP Frequency [Normal]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults
Item Help
Menu Level`
[Normal]
Use the most stable settings
[Turbo]
Use over clocked settings for
higher performance but with
higher risk of instability
[Manual]
Allows full customization of
performance options
Advanced users only
Incorrect using these features may cause your system broken. For power end-user use only.
(Note) If you want to use EasyTune utility, please set Memory Frequency to Auto. You also have to use DDR
memory module(s) with frequencies equal to or faster than the FSB frequency of the CPU you install. For
example, when using a CPU with 333Mhz FSB, you have to install DDR333 or DDR400 memory module(s).