Motherboard GA-7N400S-L Instruction Manual

BIOS Setup- 39 -

English

2-5 Power Management Setup

ACPI Suspend Type

S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)

S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM).

Soft-off by PWR-BTTN

Instant-off Press power button then Power off instantly. (Default value)

Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed less than

4 seconds.

PME Event Wake Up

This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.

Disabled Disable this function.

Enabled Enable PME as wake up event. (Default value)

ModemRingOn

An incoming call via modem or an input signal comes from the other client server on the LAN can awake

the system from any suspend state.

Disabled Disable Modem Ring on function.

Enabled Enable Modem Ring on function. (Default value)

S3 Resume by USB

This feature allows you to resume the system from USB device.

Disabled Disable this function. (Default value)

Enabled Enable this funcion.

Resume by Alarm

You can set "Resume by Alarm" item to enabled and key in Date/time to power on system.

Disabled Disable this function. (Default Value)

Enabled Enable alarm function to POWER ON system.

If RTC Alarm Lead To Power On is Enabled.

Date (of Month) Alarm : Everyday, 1~31

Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)

Power Management Setup

ACPI Suspend Type [S1(POS)]

Soft-Off by PWR-BTTN [Instant-off]

PME Event Wake Up [Enabled]

ModemRingOn [Enabled]

S3 Resume by USB [Disabled]

Resume by Alarm [Disabled]

x Date (of Month) Alarm Everyday

x Time (hh:mm:ss) Alarm 0 : 0 : 0

Power On by Mouse [Disabled]

Power On by Keyboard [Disabled]

x KB Power ON Password Enter

AC BACK Function [Soft-Off]

KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults

Item Help

Menu Level`