User Manual

& SMT Mode
Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. This feature only works
for operating systems that support multi-processor mode. AutoletstheBIOSautomaticallycongurethis
setting.(Default:Auto)
& AMD CPU fTPM
 EnablesordisablestheTPM2.0functionintegratedintheAMDCPU.(Default:Disabled)
& ExtremeMemoryProle(X.M.P.)
(Note)
 AllowstheBIOStoreadtheSPDdataonXMPmemorymodule(s)toenhancememoryperformancewhen
enabled.
Disabled  Disablesthisfunction.(Default)
Prole1  UsesProle1settings.
Prole2
(Note)
 UsesProle2settings.
& XMP High Frequency Support
(Note)
 Allowsyoutoselectthecompatibilitylevelforhigh-frequencymemory.Thisitemiscongurableonly
when ExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2.(Default:Auto)
& System Memory Multiplier
Allows you to set the system memory multiplier. AutosetsmemorymultiplieraccordingtomemorySPD
data.(Default:Auto)
 Advanced Memory Settings
 Memory Subtimings
d Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus
DriveStrength,DataBusConguration
These sections provide memory timing settings. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loadingoptimizeddefaultsorclearingtheCMOSvalues.
 SPD Info
 Displaysinformationontheinstalledmemory.
& CPU Vcore/Dynamic Vcore(DVID)/VCORE SOC/Dynamic VCORE SOC(DVID)/CPU VDD18/
CPU VDDP/PM_1VSOC/PM_1V8/DRAM Voltage (CH A/B)
These items allow you to adjust the CPU Vcore and memory voltages.
 Advanced Voltage Settings
 ThissubmenuallowsyoutocongureLoad-LineCalibrationlevel,over-voltageprotectionlevel,over-current
protection level, and PWM frequency.
(Note) This item is present only when you install a CPU and a memory module that support this feature.
- 28 -