User's Manual

USB  Chipset:
- 8 x USB 3.1 Gen 1 ports (6 ports on the back panel, 2 ports available through
the internal USB header)
- 2 x USB 2.0/1.1 ports available through the internal USB header
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 8-pin ATX 12V power connector
 1 x 4-pin ATX 12V power connector
 1 x M.2 Socket 3 connector
 6 x SATA 6Gb/s connectors
 1 x CPU fan header
 3 x system fan headers
 1xRGBLEDstripheader
 1 x front panel header
 1 x front panel audio header
 1 x USB 3.1 Gen 1 header
 1 x USB 2.0/1.1 header
 1 x S/PDIF Out header
 1 x Thunderbolt
™
add-in card connector
 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
 1 x serial port header
 1 x Clear CMOS jumper
Back Panel
Connectors
 1 x PS/2 mouse port
 1 x PS/2 Keyboard port
 1 x HDMI port
 6 x USB 3.1 Gen 1 ports
 1xRJ-45port
 3 x audio jacks
I/O Controller  iTE
®
I/O Controller Chip
Hardware
Monitor
 Voltage detection
 Temperature detection
 Fan speed detection
 Overheating warning
 Fan fail warning
 Fan speed control
* Whether the fan speed control function is supported will depend on the fan you
install.
BIOS  1x128Mbitash
 Use of licensed AMI UEFI BIOS
 PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
- 7 -