User's Manual

10
AS18X/AS28X / en master / A31008-M2001-B101-1-19 / main.fm / 19.01.2011
Industry Canada Certification
Operation is subject to the following two conditions
(1) this device may not cause interference, and (2) this
device must accept any interference, including inter-
ference that may cause undesired operation of the
device.
NOTICE: The Industry Canada label identifies certified
equipment. This certification means that the equip-
ment meets certain telecommunications network,
protective, operational and safety requirements as
prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The Depart-
ment does not guarantee the equipment will operate
to the user’s satisfaction.
Before installing this equipment, users should ensure
that it is permissible to be connected to the facilities
of the local telecommunications company. The
equipment must also be installed using an accepta-
ble method of connection. The customer should be
aware that compliance with the above conditions
may not prevent degradation of service in some situ-
ations.
Repairs to certified equipment should be coordinated
by a representative designated by the supplier.
Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the
telecommunications company cause to request the
user to disconnect the equipment.
Users should ensure for their own protection that
the electrical ground connections of the power util-
ity, telephone lines and internal metallic water pipe
system, if present, are connected together.
This precaution may be particularly important in rural
areas
NOTE: Users should not attempt to make such con-
nections themselves, but should contact the appro-
priate electric inspection authority, or electrician, as
appropriate.
This product meets the applicable Industry Canada
technical specifications.
The Ringer Equivalence Number is an indication of
the maximum number of devices allowed to be con-
nected to a telephone interface. The termination of
an interface may consist of any combination of
devices subject only to the requirement that the sum
of the RENs of all devices does not exceed five.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
FCC / ACTA Information
Warning: Changes or modifications to this unit not
expressly approved by Gigaset Communications USA
LLC could void the FCC authority to operate the
equipment. This includes the addition of any external
antenna device.
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the
bottom of the base station is a label that contains,
among other information, a product identifier in the
format US:AAAEQ##TXXXX. If requested, this number
must be provided to the telephone company.
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant tele-
phone cord and modular plug is provided with this
product. It is designed to be connected to a compati-
ble modular jack that is also compliant. See installa-
tion instructions for details.
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but
not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may
be connected to a line, as determined by the total
RENs, contact the local telephone company.
For
products approved after July 23, 2001, the REN for
this product is part of the product identifier that has
the format US:AAAEQ##TXXXX. The digits repre-
sented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.
A copy of the supplier's Declaration of Conformity
(SDoC) is available at this Internet address:
www.gigaset.com/docs.
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance, that temporary discontinuance of service
may be required. But if advance notice isn’t practical,
the telephone company will notify the customer as
soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it
is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service. If
you experience trouble with this telephone system,
disconnect it from the network until the problem has
been corrected or until you are sure that the equip
-
ment is not malfunctioning.
If trouble is experienced with this equipment, for
repair or warranty information, please contact Sup-
port at 1-866 247-8758. If the equipment is causing