User's Manual

AS18X/AS28X / en master / A31008-M2001-B101-1-19 / starting.fm / 19.01.2011

First steps

Check the pack contents

◆ one Mitel 5505H handset,

◆ one charging cradle,

◆ one mains adapter,

◆ two batteries,

◆ one battery cover,

◆ one user guide.

Setting up the charging cradle

The charging cradle is designed to be operated in enclosed, dry areas at temperatures ranging

from +5°C to +45°C.

¤ Place the charging cradle on a level, non-slip surface.

The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of

different varnishes and polishes used on today's furnishings, the occurrence of marks on the

surfaces cannot be completely ruled out.

You can also mount the charging cradle on the wall.

Please note:

◆ Never expose the telephone to the influence of heat sources, direct sunlight or other elec-

trical devices.

◆ Protect your Mitel from moisture, dust, corrosive liquids and vapours.

Connecting the charging cradle

Please note

Pay attention to the range of the base station.

This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The

range is reduced when Eco Mode (

¢ page 1) is activated.

¤ Connect the flat plug from the power supply 1.

¤ Plug the mains adapter into the plug socket

If you need to disconnect the plug from the charging cradle,

press the release button

1 and disconnect the plug 2.