User's Guide

Gigaset A690-A690A / LUG-Kombi US en / A31008-M2816-R341-1-3S19 / applications_alhena.fm / 9/13/21
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Additional functions
29
In baby monitor mode, incoming calls are only indicated on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated. Advisory tones are disabled.
All keys with the exception of the display keys are disabled.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
Activating and setting the baby monitor
¤ Menu Baby Monitor OK
Enable/disable:
¤ Activation OK ( = enabled) . . . if a phone number to call is already entered, the baby
monitor is enabled immediately
Entering/changing call number:
¤ Call Target OK Select Internal or External Call OK for External Call, enter
phone number OK
Baby Monitor and the number to call are displayed when the baby monitor is enabled and in
idle mode.
Activate/deactivate two-way talk:
¤ Two-Way Talk OK ( = enabled)
Deactivate baby monitor / Cancel alarm
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤ Test sensitivity.
¤ Test the connection, if the alarm is being forwarded to an external number.
Deactivate the baby monitor:
¤ In idle status press the display key Off
Cancel the alarm:
¤ Press the End call key during an alarm