User's Manual
Table Of Contents
- Gigaset C300/C300A - your high-quality accessory
- Overview
- Understanding the display icons
- Using the display keys
- Main menu icons
- Base overview
- Contents
- Following safety precautions
- Taking the first steps
- Using the phone
- Menu overview
- Making calls
- Using the directory and lists
- Sending SMS (text messages)
- Operating the Gigaset C300A base answering machine
- Using the network mailbox
- ECO DECT
- Using the handset as an alarm clock
- Using multiple handsets
- Handset settings
- Base station settings
- Connecting the base to the PABX
- FCC / ACTA Information
- Service (Customer Care)
- Protecting our environment
- Appendix
- Accessories
- Mounting the base on the wall
- Mounting the charger on the wall
- Index
55
Base station settings
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Version 4, 16.09.2005
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Resetting the base to the
default settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode / Eco Mode+ is deactivated
u The system PIN is not reset
§Menu§ ¤ Settings ¤ System ¤ Base Reset
~ Enter the system PIN and
press
§OK§.
§Yes§ Press the display key.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the default settings.
Please note
The answering machine is ready for use
approx. 15 seconds after the base has
been connected or reset.