User's Manual
Table Of Contents
- Gigaset C300/C300A - your high-quality accessory
- Overview
- Understanding the display icons
- Using the display keys
- Main menu icons
- Base overview
- Contents
- Following safety precautions
- Taking the first steps
- Using the phone
- Menu overview
- Making calls
- Using the directory and lists
- Sending SMS (text messages)
- Operating the Gigaset C300A base answering machine
- Using the network mailbox
- ECO DECT
- Using the handset as an alarm clock
- Using multiple handsets
- Handset settings
- Base station settings
- Connecting the base to the PABX
- FCC / ACTA Information
- Service (Customer Care)
- Protecting our environment
- Appendix
- Accessories
- Mounting the base on the wall
- Mounting the charger on the wall
- Index
56
Connecting the base to the PABX
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / pabx.fm / 16.04.2010
Version 4, 16.09.2005
Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Dialling mode and Flash
Changing the dialling mode
The following dialling modes can be
selected:
u Tone dialling (DTMF)
u Pulse dialling (PD).
§Menu§ Open main menu.
*#Q5#
Press keys.
~
§OK§
Pulse dialling mode (DP).
Or:
~Q§OK§
Tone dialling (DTMF).
Setting recall
Your phone is preset for operation on the
main connection. For operation on a PABX,
you may have to change this value. Please
refer to the user guide for your PABX.
§Menu§ Open main menu.
*#Q5#2
Press keys.
~ Enter digits for the recall time
and press
§OK§.
0 =80ms; 1 =100ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms;
6 = 600 ms; 7 = 800 ms
Setting pauses
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key c
and sending the number.
§Menu§ Open main menu.
*#Q5#O
Press keys.
~ Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press
§OK§.
Changing the pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
§Menu§ Open main menu.
*#Q5#4
Press keys.
~ Enter a digit for the length of the
pause (1 =800ms; 2 = 1600 ms;
3 = 3200 ms) and press
§OK§.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite: You are conducting a call or
have already dialled an external number.
* Press the star key.
After the call ends, pulse dialling is automat-
ically reactivated.
Please note
Tone dialling (DTMF) is now the most
common dialling mode. Pulse dialling
mode (PD) is only used for a few old
PABX s.