User's Manual

17
First steps
Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / starting.fm / 28.07.2009
Version 4, 16.09.2005
Setting up area codes
Before you can return a call from the Calls list (¢ page 33), you must store the
local area code of the area in which your phone is being used. If your phone is
in a multiple area code area, you must also store the extra codes for that area.
Local Area Code
v
¢
Ï
¢ Telephony ¢ Local Area Code
~ Enter the local area code.
§Save§ Press the Display key.
a When the Saved message displays, press and hold to return to idle
state.
Extra Codes
v
¢
Ï
¢ Telephony ¢ Extra Codes
~ Enter the extra code.
§Save§ Press the Display key.
a When the Saved message displays, press and hold to return to idle
state.
Repeat the above steps until all the extra codes have been entered for your
area. A maximum of five (5) extra codes can be stored.
Connecting a headset
After removing the plastic cover, you can connect a
headset to the left-hand side of your telephone with
the 2.5mm jack connector. HAMA and Plantronics
M40, MX100 and MX150 headsets are all suitable.
The headset volume corresponds to the settings for the
handset volume (
¢ page 48). After using the head-
set, replace the plastic cover to enable optimum sound
in speaker mode.
A compatibility list of tested headsets can be found on the Internet at:
www.plantronics.com/productfinder
.
Warning
Do not charge the handset in charging unit or base while the headset is
connected.