User's Manual

Table Of Contents
42
Using several handsets
Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / registr_sett.fm / 28.07.2009
Version 4, 16.09.2005
Using several handsets
Registering handsets
You can register up to six handsets to your
base.
A Gigaset C59H handset can be registered
on up to four bases.
Manually registering the Gigaset C59H
on Gigaset C590/C595
You must manually activate registration
of the handset on both the handset and
the base.
When the registration process has com-
pleted successfully, the handset returns to
idle state. The handset's internal number
is shown in the display e.g.
INT 1. If not,
repeat the procedure.
On the handset
if the handset is not registered to any
base.
§Register§ Press the display key.
The handset is already registered to a
base:
v
¢
Ï
¢ Registration
¢ Register Handset
A message displays that a search for a base
that is ready for registration is being car-
ried out.
~ If required, enter the system
PIN for the base and press
§OK§.
If the handset is already registered to more
than one base:
s Select the base, e.g.
Base 3 and
press §OK§.
On the base
Within 60 seconds press and hold the reg-
istration/paging button on the base
(¢ page 3) (for approx. 3 seconds).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as defined below.
On the handset
¤ Start to register the handset as
described in its user guide.
On the base
Press and hold the registration/paging
button on the base (¢ page 3) (for
approx. 3 sec.).
De-registering handsets
You can de-register any other registered
handset from any registered Gigaset C59H
handset.
v
¢
Ï
¢ Registration
¢ De-reg. Handset
s Select the handset you wish to
deregister and press
§OK§.
(The handset you are currently
using is highlighted with <).
~ Enter the current system PIN
and press
§Save§.
§Yes§ Press the display key.
Locating a handset ("Paging")
You can locate your handset using the
base.
¤ Briefly press the registration/paging
button on the base (¢ page 3).
¤ All handsets will ring simultaneously
("paging"), even if the ringtones are
deactivated.
Ending paging
¤ Briefly press the registration/paging
button on the base or press the talk key
c on the handset.