User's Manual
Table Of Contents
- The handset at a glance
- Display symbols
- The base at a glance
- Contents
- Safety precautions
- Gigaset C590/C595 - more than just a telephone
- First steps
- Using the phone
- Menu overview
- Making calls
- Using the directory and lists
- Operating the answering machine on the Gigaset C595 base
- Using the network mailbox
- ECO DECT
- Setting the alarm clock
- Using several handsets
- Using a handset as a room monitor
- Handset settings
- Base settings
- Connecting the base to the PABX
- Troubleshooting
- Appendix
- FCC / ACTA Information
- Service (Customer Care)
- Accessories
- Mounting the base on the wall
- Mounting the charging cradle on the wall
- Index
51
Base settings
Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / registr_sett.fm / 28.07.2009
Version 4, 16.09.2005
Base settings
The base settings are performed using a
registered Gigaset C59H handset.
Changing the base ringtones
u Volume:
You can choose between five levels of
volumes (1–5; e.g. level 3 = Š) and
the "crescendo" ringtone (6; where the
volume increases with each ring =
‡).
u Ringtones:
You can select a ringtone from a list of
pre-loaded ringtones.
In idle state:
v
¢ Audio Settings
¢ Ringtones (Base)
¤ Change multiple line input:
r Set volume.
s Scroll to the next line.
r Set melody.
§Save§ Press the display key to save
the setting.
Activating/deactivating
music on hold
v
¢ Audio Settings
¢ Music on Hold
Press §Change§ to activate or deactivate the
music on hold (³ = on).
Protecting against
unauthorized access
Protect the system settings of the base
with a PIN known only to yourself. You
must enter the system PIN when, for
example, you register/deregister a hand-
set to/from the base or when you restore
the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base (the default is: 0000) to a 4-
digit PIN known only by you.
Gigaset C595 only: Setting a system PIN
facilitates remote operation of the
answering machine
¢ page 39.
v
¢
Ï
¢ System ¢ System PIN
~ Enter the current system PIN
and press
§OK§.
~ Enter your new system PIN
and press
§OK§.
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base to the original code
0000:
u Disconnect the power cord from the
base.
u Hold down the registration/paging but-
ton on the base while reconnecting the
power cable to the base.
u Keep the key pressed for at least 2
seconds.
The base has now been reset and the sys-
tem PIN 0000 set.
Restoring the base to the
factory settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered.
u Eco Mode is switched on.
u The system PIN is not reset.
v
¢
Ï
¢ System ¢ Base Reset
~ At the prompt, enter the sys-
tem PIN and press
§OK§.
§Yes§ Press the display key.
•
•
Please note
All handsets are deregistered and must
be re-registered. All settings are
restored to the factory settings.
•