User's Manual

150
Appendix
Writing names
Press the relevant key several times to enter
letters/characters.
¤ Enter the individual letters/characters by
pressing the corresponding key.
The characters assigned to the key are
shown in a selection line at the bottom left
of the screen. The selected character is high-
lighted.
¤ Briefly press the key several times in suc-
cession to select the required letter/char-
acter.
If you press and hold the key, the corre-
sponding digit is inserted.
Standard characters
1) Space
2) Line break
Using Gigaset QuickSync –
additional functions via the
PC interface
You can connect your base to your computer
via Bluetooth
(page 108) or via the Ethernet
cable supplied. To use the Bluetooth con-
nection, your PC must be equipped with a
suitable dongle and Bluetooth must be acti-
vated on the base.
You can access base functions and data from
your PC via AT commands.
The "Gigaset QuickSync" program (found
on the enclosed CD) provides you with a
convenient interface for communicating
with the base.
¤ Install this program on your PC.
Here are some of the functions that will then
be available to you:
u Reading service information, e.g.,
firmware version, serial number, manu-
facturer, MAC address of the base.
u Synchronising the directory on your base
with your PC's Outlook contacts.
u Transferring images as screensavers/
caller pictures from the PC to the resource
directory on the base.
u Downloading sounds (ringer melodies)
from the PC to the base.
You can also use AT commands to:
u Make outgoing calls and accept incom-
ing calls. The display on the base behaves
as if the call was being handled directly
on it.
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x
 1
2 abc2äáàâãç
3 def3ëéèê
4 gh i4ïíìî
5 jkl5
L mno6öñóòôõ
M pq r s 7ß
N tuv8üúùû
O wxy z 9ÿýæøå
Q .,?! 0
1)
2)
Please note
It is not possible to have two parallel con-
nections active between the PC and base
via Bluetooth and LAN.