User Manual
Table Of Contents
- Overview of handset
- Overview of base station
- Contents
- Safety precautions
- Getting started
- Checking the contents of the package
- Installing the base station and charging cradle
- Connecting the base station to the telephone network and the mains power supply
- Mounting the base station on the wall (optional)
- Connecting the charging cradle
- Setting up the handset for use
- Connecting the headset
- Changing the display language
- Setting the date and time
- What would you like to do next?
- Understanding the operating steps in the user guide
- Getting to know your phone
- Making calls
- Adjusting the telephone settings
- Changing the display language
- Setting your country and local area codes
- Adjusting the handset display settings
- Activating/deactivating visual call
- Activating/deactivating Auto Answer
- Setting earpiece profiles
- Setting the handset ringtones
- Silent alert
- Activating/deactivating advisory tones
- Activating/deactivating music on hold
- Protection against unwanted calls
- Quick access to numbers and functions
- Changing the system PIN
- Restoring phone to default setting
- ECO DECT
- Answer machine (Gigaset E630A)
- Network mailbox
- Multiple handsets
- Phonebook (Address book)
- Call list
- Contactability
- Sound profiles
- Spot LED
- Calendar
- Alarm clock
- Baby monitor
- Operating the telephone on a router/PABX
- Display icons
- Menu tree
- Environment
- Appendix
- FCC / ACTA Information
- Service (Customer Care)
- Accessories
- Index
en fr es 53
Gigaset E630-E360A / Turtle LUG - USA en / A31008-XXXXX-XXXX-X-XX / appendix.fm / 3/27/15
Template Borneo, Version 1, 21.06.2012
Questions and answers
If you have any queries about the use of your telephone, suggested solutions are available on
our web-site at
www.gigaset.com/service ¤ FAQ ¤ First steps for troubleshooting.
The table below also lists steps for troubleshooting.
You are not sure whether your device is equipped with an integrated answer machine.
¥ Open the answer machine menu: v ¤ Ì ¤ OK
Your device is equipped with an integrated answer machine if the submenu Activation is available.
The display is blank.
1. The handset is not activated.
¥ Hold down a.
2. The battery is empty.
¥ Charge the battery or replace it (¢ page 7).
3. The key and display lock is activated.
¥ Hold down the hash key #.
"No Base" flashes on the display.
1. The handset is outside the range of the base.
¥ Move the handset closer to the base.
2. The base is not activated.
¥ Check the base power adapter.
3. The base's range is reduced because Maximum Range is deactivated.
¥ Activate Maximum Range (¢ page 30) or reduce the distance between the handset and base.
"Please register handset" or "Place han
dset in base" flashes on the display.
The handset has not yet been registered or was de-registered due to the registration of an additional handset
(mor
e than six DECT registrations).
¥ Register the handset again (¢ page 36).
Your settings are not accepted.
¥ Ensure that you have set the Profile Personal before you make changes to the device settings
(
¢ page 43).
The handset does not ring.
1. The ringtone is deactivated.
¥ Activate ringtone (¢ page 26).
2. Call forwarding is set.
¥ Deactivate call forwarding (¢ page 42).
3. The phone does not ring if the caller has withheld his number.
¥ Activate the ringtone for unknown calls (¢ page 27).
4. The phone does not ring during a specific period or for certain numbers.
¥ Check time control for external calls (¢ page 27) .
You cannot hear a ringtone/dialling tone from the fixed line network.
The phone cord supplied has not been used or has been replaced by a new cord with the wrong pin
c
onnections.
¥ Please always use the phone cord supplied or ensure that the pin connections are correct when
purchasing from a retailer (
¢ page 57).
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
¥ Repeat the process, reset the system PIN to 0000 if required (¢ page 29).