User's Manual
Table Of Contents
- Congratulations
- Brief overview
- Contents
- Safety precautions
- Gigaset E450 - more than just a telephone
- First Steps
- Making calls
- Operating the handset
- Using the directory and lists
- Storing a number in the directory
- Storing a number in the call-by-call list
- Selecting entries in the directory and call-by-call list
- Dialing with the directory/ Call-by-Call list
- Managing entries in the directory/ Call-by-Call list
- Using quick dial keys
- Sending the directory/call-by-call list to another handset
- Adding a displayed number to the directory
- Copying a number from the directory
- Storing anniversaries in the directory
- Manual last number redial
- Managing entries in the last number redial list
- Opening lists with the message key
- Using the network mailbox
- Using several handsets
- Handset settings
- Base station settings
- Shortcuts
- Connecting the base station to the PABX
- Appendix
- Safety precautions
- Notes on the operating instructions
- Accessories
- Index
9
First Steps
Gigaset E450 / USA EN / A31008-M17xx-B101-1-19 / starting.fm / 28.3.06
Locking the battery cover
Insert the catches on the lock ring or belt
clip into the notches in the casing and
make sure that the arrow markings on the
casing are facing those on the bottom of
the ring. Turn the lock ring or belt clip
clockwise to the end stop. When both
holes are horizontally aligned with the
upper edge of the handset the lock ring is
closed.
Opening the battery cover
Position both thumbs on the lock ring and
simultaneously turn the lock ring or belt
clip anticlockwise and remove.
¤ Insert a coin into the cavity at the top of
the battery cover and twist it until the
cover opens.
Placing the handset in the base station
and registering
¤ Place the handset in the base with its
display facing outwards.
The handset registers automatically. Reg-
istration takes around 1 minute. During
this time Regstr.Procedure appears in the
display and the name of the base station
flashes, for example Base 1. The handset
will be assigned the lowest unassigned
internal intercom number (1–6).
This will appear in the display when regis-
tration is complete, for example INT 1.
This means that the number 1 has been
assigned. If the internal numbers 1–6
are already assigned to other units, the
number 6 is overwritten.
Leave the handset in the base station to
charge the battery pack.
For questions and problems see page 33.
Headset socket
Most headsets with standard 2.5mm mini
plugs are compatible with this handset.
If you do not connect a headset, please
insert the cover supplied for the headset
socket to support the splash proof feature.
Notes:
– Automatic registration is only possible if
no-one is making calls using the base sta-
tion.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work the
handset will need to be registered manually
(page 21).
– You can change the name of the handset
(page 24).
Notes:
– If the handset has switched itself off
because the battery has no charge, and is
then placed in the base station, it will
switch itself on automatically.
– The handset must only be placed in the
designated base.