Operation Manual

Gigaset DE700 IP PRO / en / A31008-M2211-R101-5-7619 / web_configurator.fm / 13.09.2012
PRO Version 3, 30.05.2012
105
Web configurator – configuring the phone on a PC
Web configurator – configuring the phone on a PC
The Web configurator provides you with a user interface that you can use to configure your
Gigaset DE700 IP PRO on the PC. The setup assistant makes it easier for you to set your device
up for the first time.
Prerequisite: Your phone is connected to the local network.
In most cases, this connection is established automatically as soon as you connect the device
using a network cable (
£ page 14). If this is not the case, you establish the connection to the
local network via the display menu when you set the device up for the first time (
£ page 18).
Starting the Web configurator
You will need the IP address for your phone. You will find this via the display menu, in the
LAN settings for the device:
‰ ¢ Settings ¢ Connectivity ¢ Local Network ( £ page 94).
Accessing the Web configurator:
¤ Launch the Internet browser on your PC.
¤ Enter the IP address in the browser's address field:
Example:
The login screen appears.
¤ Select the appropriate language.
¤ Select the required user type and enter the corresponding password:
¤ Click on OK.
The Web configurator will now start.
The following describes all functions of the Web configurator. Please be aware that not all
functions are available in User mode.
Note
The IP address can sometimes change, depending on the settings of the DHCP server in
your network.
User If you want to operate your phone on the PC.
Default password: user
Administrator If you want to configure your phone.
Default password: admin
Note
For your security, you should change the default passwords ( £ page 159).