Operation Manual

118
Configuring phone settings via the Web configurator
Gigaset DE700 IP PRO / en / A31008-M2211-R101-5-7619 / web_configurator.fm / 13.09.2012
PRO Version 3, 30.05.2012
IPv4 configuration
¤ Select Dynamic if your device receives the IP address via a DHCP server.
¤ Select Static if your device receives a fixed IP address.
If the Dynamic setting is selected, all further settings are configured automatically. They are
displayed and cannot be changed.
If you selected Static as the address type, you must configure the following settings:
IP Address
Enter an IP address for your phone. This IP address allows your phone to be reached by
other subscribers in your local network (e.g., PC).
The IP address comprises four individual groups of numbers with decimal values from 0 to
255 that are separated by a dot, e.g., 192.168.2.1.
The following should be observed:
– The IP address must be included in the address block used by the router/gateway for
the local network. The valid address block is defined by the IP address for the router/
gateway and the subnet mask (see example).
– The IP address must be unique across the network, which means that it must not be
used by another device connected to the router/gateway.
– The fixed IP address must not belong to the address block that is reserved for the DHCP
server for the router/gateway.
Check the settings on the router or ask your network administrator.
Example:
Router IP address: 192.168.2.1
Network subnet mask 255.255.255.0
DHCP server address block 192.168.2.101 – 192.168.2.255
Possible IP addresses for the phone [phone]