Operation Manual

Gigaset DE700 IP PRO / en / A31008-M2211-R101-5-7619 / web_configurator.fm / 13.09.2012

PRO Version 3, 30.05.2012

135

Configuring phone settings via the Web configurator

Advanced Settings

You can find further parameters for configuring your VoIP connection under Advanced Set-

tings.

Click on Show next to Advanced Settings.

For further information on configuration settings, please refer to the section Configuring a

VoIP account on page 108.

You can also configure the following settings here:

Counting missed and accepted calls

Missed and accepted calls for this VoIP account are recorded in the call lists for the phone if

this function is activated (

page 46).

Open the Advanced Settings area.

Select Yes for Missed/accepted calls count, if you wish to activate this function. Default

setting: No

Allowing or blocking Call Waiting

If you receive another incoming call during a call, this is indicated by Call Waiting by default.

For each connection, it is possible to set whether or not Call Waiting is permitted.

Open the Advanced Settings area.

Select No for Call Waiting if you wish to deactivate this function. Default setting: Yes

Setting the ring tone

You can set a ring tone for each connection.

Open the Advanced Settings area.

Select a Melody.

Click on Test to play the selected melody.

Saving settings

Click on Save to save your settings for this connection.

Deleting a connection

Click on Delete connection to delete the displayed connection.