Operation Manual

Gigaset DE700 IP PRO / en / A31008-M2211-R101-5-7619 / starting.fm / 13.09.2012

PRO Version 3, 30.05.2012

First steps

Connecting the PC

You must connect your Gigaset DE700 IP PRO to a PC to use the Web user interface or to con-

figure the phone using the Web configurator.

Your phone has an integrated two-port switch. This allows you to connect your PC to the local

network via the phone and avoid using additional connection ports on the switch or router.

You need an additional Ethernet cable to connect a PC.

§§1§§

Connect an Ethernet cable to the left-hand LAN port on the rear of the phone.

§§2§§

Connect the other end of the Ethernet cable to a LAN port on the PC.

Connecting a device to the mains power supply (if required)

Your Gigaset DE700 IP PRO is supplied with sufficient power by PoE (Power over Ethernet) and

does not need to be connected to the mains power supply. Prerequisite: The device is con-

nected to an Ethernet switch with PoE functionality (PoE class IEEE802.3af) (

page 14).

The power adapter is supplied with three different plug-in modules for Europe, Great Britain

and the USA. First attach the appropriate plug-in module to the power supply unit.