Operation Manual

Gigaset DE700 IP PRO / en / A31008-M2211-R101-5-7619 / telephony.fm / 13.09.2012
PRO Version 3, 30.05.2012
33
Making calls
Dialling a number using a function key
You can assign phone numbers to up to 14 function keys; you then only need to press a key
once to dial the number. You can increase the number of function keys by connecting exten-
sion modules. Use the Web configurator to assign numbers to the function keys
(
£ page 154).
S Press the function key.
The number assigned to the function key is dialled.
Shared line
The Gigaset DE700 IP PRO allows one VoIP account to be used jointly by multiple phones. The
phone number for the shared account is assigned to a function key.
Prerequisites:
u Your phone system supports this function. All users who share a VoIP account are merged
into one group on the phone system.
u The VoIP account for the shared line is assigned to a function key ( £ page 154).
If you make a call via the function key on a "split line", the corresponding function keys light
up on all the extensions in this group. The users of these extensions cannot use the "split line"
until it is back in idle status or the call is put on hold or ended.
Dialling a number from the call lists
The following calls are saved:
u Outgoing calls (redial list)
u Accepted calls
u Missed calls
The last 30 numbers are stored in each of the call lists. The name will appear on the display if
you have saved the number in the directory.
You can browse through the entries and dial directly from within the record.
If there are new entries in the missed calls list, the Message Centre key
E flashes.
To save numbers from a list in the directory, see ( £ page 46).
Viewing call lists and dialling numbers
Open the required call list:
È Open the redial list using the navigation key t .
E Open the list of missed messages in the Message Centre.
Or use the display menu
‰ ¢ Call Lists ¢ All Calls
‰ ¢ Call Lists ¢ Outgoing Calls
‰ ¢ Call Lists ¢ Missed Calls
‰ ¢ Call Lists ¢ Accepted Calls