Quick Start Guide

124
Web configurator – configuring the phone on a PC
Gigaset DE900 IP PRO / en / A31008-M2210-R101-4-7619 / web_configurator.fm / 05.09.2012
PRO Version 3, 30.05.2012
Configuration without provider profile
If your provider is not on the list, select Other Provider.
¤ Select the required settings for your VoIP account on the following screens. Your provider
will supply you with this data.
General provider data
Domain
Specify the last part of your SIP address (URI).
Example: Example: For the SIP address [e-mail] you would enter pro-
vider.de.
Proxy Server Address
The SIP proxy is your VoIP provider's gateway server. Enter the IP address or the DNS name
of your SIP proxy server.
Example: myprovider.com.
Proxy Server Port
Enter the number of the communication port that the SIP proxy uses to send and receive
signalling data (SIP port). Port 5060 is used by most VoIP providers.
Registration Server
Enter the IP address or the DNS name of your registrar server. The registrar is needed when
the phone is registered. It assigns your SIP address (username@domain) to the public IP
address/port number your phone uses to log in. With most VoIP providers, the registrar
server is identical to the SIP server.
Example: reg.myprovider.de.
Registration Server Port
Enter the communication port used on the registrar. Port 5060 is used in most cases.
Registration Refresh Time [sec]
Enter the time intervals at which the phone should repeat the registration with the VoIP
server (SIP proxy) (a request will be sent to establish a session). The repeat is required so
that the phone's entry in the tables of the SIP proxy is retained and the phone can there-
fore be reached. The repeat will be carried out for all activated VoIP phone numbers. The
default is 120 seconds.
If you enter 0 seconds, the registration will not be repeated periodically.
¤ Click on Next >.