Manual

Gigaset SL800H / LHSG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / starting_LHSG.fm / 8/8/22
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Getting started
Availability and operation of the functions
may differ on your telephone.
11
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls and to
enable the alarm to be used.
The active input position flashes.
Change input position:
To switch between the entry fields:
Enter date:
 enter the day, month and year in 8-digit format.
Enter time:
 enter hours and minutes in 4-digit format.
Save settings:
 Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
 Press and hold the End call key
The telephone is now ready for use.
Attaching the belt clip
The handset has notches on each side for attaching the belt
clip.
• Attaching the belt clip: Press the belt clip onto the
back of the handset so that the tabs on the belt clip click
into place in the notches.
• Removing the belt clip: Press the centre of the belt
clip firmly with your right thumb. Push the nail of
your left thumb up between the clip and the casing.
Slide the clip upwards to remove.
Date and time are set using the base. The date and time can also be set on an
IP-compatible base via a time server on the network.
If the base permits it, you can set the date and time manually using the handset.
 Press the display key Set Time
or, if the date and time have already been set:
 Settings OK Date/Time OK
Set Calls
Date/Time
Date:
15.08.2022
Time:
00:00
Back Save