Manual
Table Of Contents
- Contents
- Overview
- Getting started
- Using the telephone
- Directories
- Answer machine
- Additional functions
- Setting the handset
- Setting the date and time manually
- Changing the language
- Select country
- Display and keypad
- Tones and signals
- Auto answer
- Emergency numbers
- Changing the name of a connection (line)
- Assigning handsets to a connection (line)
- Permit/prevent multiple calls
- Permit/prevent internal listening in
- Show system and line statuses
- Fast access to numbers and functions
- Changing the handset PIN
- Testing DECT encryption
- Handset update
- Resetting a handset
- Resetting the handset to the default settings
- Settings for the base
- Appendix
- Index
- Open Source Software
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Additional functions using the PC interface
Gigaset SL800H / LHSG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / applications_2_without-SMS.fm / 8/8/22
48
Availability and operation of the functions
may differ on your telephone.
Saving and restoring settings
Saving settings:
Save settings select which data to save (images, melodies / settings / contacts, call lists)
( = selected) Save settings select a storage location in the file system OK . . . the
data selected is saved (file name extension: .hsdat)
Restore settings:
Save settings Restore settings Select a backup file in the file system Open . . . the
data saved is loaded onto the handset
The message Da
ta transfer in progress is shown on the display during data transfer between
the handset and PC. During this time, it is not possible to enter any data using the keypad and
incoming calls are ignored.
Carrying out a firmware update
Update firmware . . . The current firmware version is shown Update
The update process may take up to 10 minutes (not including download time).
The data are first downloaded from the online update server. The time required for this depends
on Internet connection speed.
The display on your telephone is switched off, the Message key and the Talk key flash.
Once the update is complete, your tele
phone will automatically restart.
Firmware updating is only possible via USB.
Do
not interrupt the process and do not remove the USB data cable.
The firmware can also be updated directly via the DECT radio link if the base/router
supports this ( Handset Update).