Manual
Table Of Contents
- Contents
- Overview
- Getting started
- Using the telephone
- Directories
- Answer machine
- Additional functions
- Setting the handset
- Setting the date and time manually
- Changing the language
- Select country
- Display and keypad
- Tones and signals
- Auto answer
- Emergency numbers
- Changing the name of a connection (line)
- Assigning handsets to a connection (line)
- Permit/prevent multiple calls
- Permit/prevent internal listening in
- Show system and line statuses
- Fast access to numbers and functions
- Changing the handset PIN
- Testing DECT encryption
- Handset update
- Resetting a handset
- Resetting the handset to the default settings
- Settings for the base
- Appendix
- Index
- Open Source Software
Gigaset SL800H / LHSG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / starting_LHSG.fm / 8/8/22
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Getting started
Availability and operation of the functions
may differ on your telephone.
9
Charge the battery
Charge the battery fully prior to first use in the
charging cradle or using a standard USB mains
adapter.
The battery is fully charged when the power icon
disappears from the display.
As soon as power is applied to the handset, a Setup wizard starts.
Setting the display language
Press the control key until the language required is selected
on the display, e.g. English press the display key OK
You can also change the display language later on in the Settings
menu.
Select country
Press the control key until the country in which you are using
the device is highlighted on the display, e.g. Germany Press
the Display key OK
You can also change the country later on from menu Settings
Registering the handset (depending on the base)
On the base / On the router
The battery may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Switch the handset off if you are not using it for a couple of days.
If you are not using the handset for a couple of weeks, switch it off and remove the
battery.
Registration must be initiated on the base station and on the handset.
Both must be carried out within 60 secs.
Gigaset base:
Press and hold the Registration/Paging key on the base station
(approx. 3 sec.).
Other base station/router:
Information regarding the registration procedure
Documentation regarding your base/your router
2.5h
Deutsch
English
Francais
United Kingdom
Ireland
Austria