Manual

Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / starting.fm / 12/16/22
10
Setting a name for the telephone
 Delete existing text Enter required name
 Close the virtual keyboard using the small keyboard icon on the bottom right.
Internal numbers between 10 and 35 can be assigned by default.
Changing internal number range:
 Check the check box next to Customize Internal number range Enter the required
number range in the from and to fields
Valid values: maximum of 100 numbers between 0 and 9999, default: 10
 Next
Selecting network connection
The telephone can be connected to the network over LAN or WLAN.
LAN configuration
 Select LAN (=selected) Next
The IP configuration of the telephone is carried out automatically by default. You connect the
telephone to the network (for example, using a router), the IP address is assigned automatically
and further network settings are adopted. The IP address is displayed
If you need a different configuration for your network:
 Manual configuration From the IP address type list, select static In the IP address
field, enter the IP address for Gigaset Fusion In the Standard gateway field, enter the
IP address of the standard gateway in the network In the Subnet mask field, enter the
subnet mask for the network
If a connection to the network is established over a proxy server:
 Enable Proxy settings (=enabled) In the Proxy server field, enter the IP address
of the proxy server In the Proxy port field, enter the port number of the proxy server
 Next
WLAN configuration
 Select Wi-Fi ( = selected) Next . . . The WLANs in range are displayed Select the
required WLAN Next Enter the LAN password for your network Next ... The tele-
phone is connected to the WLAN
Ensure that you enter the correct information that matches your network settings
during manual configuration. If the information is incorrect, it may mean the device
and Web user interface become inaccessible. In this case, you would have to carry
out a hardware reset to default settings on the device.