Manual

Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / telephony.fm / 12/16/22
Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Making calls
31
Talking with several participants on the telephone
Accepting/rejecting Call Waiting
Another call comes in during a conversation. The call is signalled in the display and by the Call
Waiting tone.
Accept a call:
 Accept . . . The connection to the waiting participant is made. The first participant is put on
hold and hears some on-hold music.
Rejecting a call: Reject
End the call, resume the on-hold call: Press the End call key .
Permit/prevent Call Waiting
When the function is enabled during a call, another incoming call is signalled by a call waiting
tone.
In display menu
 Settings Telephony Call settings ... Under Call waiting you will
see a list of set-up telephones Enable/disable Call Waiting for each device with the switch
(=enabled)
In Web user interface
 Settings Tele phony Advanced settings Call waiting ... In Call waiting the
registered telephones are listed Enable/disable Call Waiting with the check box
(=enabled)
Set the Call Waiting tone (only for your device):
 Select the required tone from the Ringtone list
The PABX or the provider supports this function and the function is activated on the
telephone.
Off There is no Call Waiting tone. A waiting call is only shown visually on
the display.
Single beep
Beep (every 4 sec.)
Call Waiting is indicated with a beep in the handset.
You can choose from various tone intervals.
Save the settings:
 Save