Manual

Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Call divert
Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / telephony.fm / 12/16/22
34
Setting up Call divert
In Web user interface
 Settings Tele phony Call diverts Next to a device, connection or call group,
click Enable the required divert (Always / On Busy / When no answer) with the switch
( = enabled) . . . The Target list shows suitable divert destinations Select destination
(Phone number / DECT handset / Group / Fusion base) Enter number depending on
selected destination or select from list
When no answer: The call is diverted to the specified number if it is not accepted within the time
entered in Delay.
 Select time from Delay list
Show Call divert for connections and call groups in the phone display menu:
 Enable/disable function with the switch next to Show ( = enabled) . . . Call divert is
listed under Settings Telephony Call divert
Save settings: Save
Enabling/disabling and editing Call divert
In display menu
 Settings Telephony Call divert
or
 Open Quick access Touch and hold Divert Calls Always
 Select device . . . Call diverts (Always / When busy / No Answer) are displayed Enable/
disable required Call divert with the switch ( = enabled) If required, change Target
and/or corresponding number Save
In Web user interface
 Settings Tele phony Call diverts Next to a device, connection or call group,
click Enable/disable required Call divert (Always / When busy / When no answer) with
the switch ( = enabled) If required, change Target and/or corresponding number
Save
Call divert is set up in the Web user interface. For Call divert for connections and call
groups, the Divert displayed on phone interface option is enabled for the device.