Manual

Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Door interphone
Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / applications.fm / 12/16/22
58
Additional functions
Door interphone
The telephone can operate a door interphone.
Setting up a door interphone
The door interphone must be entered as a SIP device in the list of telephones. Not all the param-
eters relevant for SIP phones are relevant for door interphones.
In Web user interface
 Settings Tele phony Phone devices Add ... The device wizard is started
Select the SIP Device device type Next
 Enable the door interphone with the switch ( = enabled) Next
 Next ... The Number assignment and MWI Assignment screens are not relevant for door
interphones Skip these with Next
The settings are displayed again. Complete set-up: Finish
For door interphone authentication, you need the device SIP password and user
name and the DTMF code to open the door.
Device Name
 Enter the door interphone name in the network
Internal phone number /
Username
 Select the internal number for the door interphone
Authentication pass-
word / SIP username
 Enter the device SIP password and user name
DTMF code (open door) The DTMF code is sent from the phone to the door interphone to
open the door.
 Enter the DTMF code for the door interphone
Username / Password
 Enter the access data for access to the door interphone video
stream (if required)
If the door interphone has a camera:
Camera (URL)
 Enter the camera URL
Picture refresh time
 Enter time interval for refreshing the camera image
Unit: fps (frames per second)
Only cameras that support the motion JPEG (mjpeg) image format are supported.