Manual

Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings.fm / 12/16/22
Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Telephony
75
Changing settings for your own device
In Web user interface0
 Settings Tele phony Phone devices Next to Own device click Change
settings as required Save
Setting Message configuration
(MWI = Message Waiting Indicator)
If the function is enabled, the Message key flashes when a new voice message is received.
Set which answer machine you will receive indications for via the Message key if a new voice
message is received. You can create this setting for your own device, SIP phones and DECT
handsets. All answer machines can be assigned to Gigaset Fusion. For other SIP phones and
DECT handsets, only one answer machine can be configured for MWI.
In Web user interface
 Settings Tele phony Phone devices Next to the entry for your own device, a
SIP phone or a DECT handset, click . . . The local answer machines and network mailboxes
are listed under Message configuration
Set up call groups
A call group comprises multiple phones that have been assigned the same numbers. An
incoming call to one of these numbers can be accepted on all the devices in the call group.
Call groups can be set up with different call behaviours:
In display menu
 Settings Telephony Devices . . . If there are already call groups, they
are listed with names and internal numbers
Add new group:
 Add new . . . The Devices & Groups wizard is opened Select Group Next Enter a
name for the group Select internal number Select call behaviour Next ... All regis-
tered phones are listed Select the devices to be included in the call group
(=selected) Next Use to set the order of the devices for linear call behaviour
Next . . . All registered connections are listed Select connections for the call group
(=selected) Next . . . The settings for the call group are displayed again Finish
Own device
 Enable/disable answer machine ( = enabled)
SIP devices and DECT
handsets:
 If required, select another answer machine or No selection
( = selected)
Linear Initially, the call is signalled on the first device. If the call is not accepted, the
next device in the group is called and so on.
Parallel The call is signalled on all devices in the call group. The first participant who lifts
the handset takes the call.