Manual

Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings.fm / 12/16/22
Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Telephony
77
In Web user interface
 Settings Tele ph on y Connections . . . Connections that have already been set up
are listed with the following information:
Adding a new connection
Gigaset makes provider profiles available for setting up VoIP connections, with suitable basic
parameters set for a provider. All you have to do is enter the access data. If there is no profile for
your provider, you can set up configuration manually.
To set up connections, use the SIP Connection wizard.
In display menu
 Wizards VoIP Connections
In Web user interface
 Wizards SIP Connection
The wizard guides you step-by-step through all necessary configuration steps.
Editing/deleting connections
In Web user interface
 Settings Telephony Connections . . . The connections that have been set up are
listed
Name Connection name
Provider Phone provider making the connection available
Phone numbers Numbers available for the connection
Status Connection status (Registered/Not registered)
Activation / = the connection is disabled/enabled
If you temporarily do not need a connection, you can disable it.
Registration status is updated dynamically.
If all data was entered correctly, it may take three to ten seconds before a line is
displayed as Registered.
You need the access data of an IP telephony provider (user name, registration name,
password etc.).
or:
 Settings Telephony Connections Add
or:
 Settings Te le ph ony Connections Add
Edit connection:
 Next to the entry click Make changes Save
Delete connection:
 Next to the entry, click Confirm with Ok