Manual

Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings_advanced.fm / 12/16/22
Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Making/receiving calls
83
Setting speech path
Define how calls are conducted if they come in via a call manager or if outgoing calls are initiated
using a function key
In Web user interface
 Settings Tele phony Advanced settings Speech path Select the required
options ( = selected)
Calls via Call Manager: Accept call directly
Outgoing calls via function key: Execute call
Save settings: Save
Setting STUN server
(Only for Admin user role)
If you have downloaded the provider profile of your VoIP provider from the Gigaset configura-
tion server, the settings for STUN are already assigned (STUN = Session Traversal Utilities for
NAT). The phone can determine its public address using STUN. The phone needs this address to
receive caller voice data.
If your phone is connected to a router with NAT (Network Address Translation) and/or a firewall,
a few settings in this area may need to be changed for your phone to be accessible (i.e. address-
able) from the Internet. NAT hides the IP addresses of nodes in the LAN behind the shared, public
IP address of the router.
In Web user interface
 Settings Tele phony Advanced settings STUN server
via headset The phone automatically enables the connected headset to accept a
call.
via handsfree The phone automatically enables the handsfree function to accept a
call.
No The call is not accepted automatically.
via headset The phone automatically enables the connected headset when dial-
ling.
via handsfree The phone automatically enables the handsfree function when dial-
ling.
Activate STUN
 Enable/disable the function with the switch ( = enabled)
STUN server address
 Enter the (fully qualified) DNS name or IP address of the STUN
server in the Internet followed by the port number (e.g. public-
stun:3478)
Save the settings:
 Save
The STUN server is set up throughout the system. To allow use for an external VoIP
connection, the ICE support function must be enabled for the connection. This is
carried out automatically for connections set up via provider profile.