Manual

Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings_advanced.fm / 12/16/22
Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Network
89
Enabling/disabling Link Layer Discovery Protocol
The Link Layer Discovery Protocol (LLDP) allows devices from different providers to pass on infor-
mation with directly linked neighbouring devices. Enable LLDP if devices have multiple
providers in your network.
In Web user interface
 Settings Network LAN Link Layer Discovery Protocol (LLDP) Enable/disable
with the switch ( = enabled) Enter value for Packet intervals (interval at which LLDP
packages are transmitted) (default: 60 seconds).
Quality of Service (QoS)
The tone quality depends on the priority of voice data in the network. VoIP data packages are
prioritised using the QoS protocol DiffServ (differentiated services). DiffServ defines a range of
classes for services and various priority levels within these classes for which specific prioritisation
procedures are defined.
You can specify different QoS values for SIP and RTP packets. SIP packages contain signalling
data, while RTP (Real-time Transport Protocol) is used for voice data transmission.
 Settings Network LAN Quality of Service (QoS) Enter the required QoS
values in the SIP ToS / DiffServ and RTP ToS/DiffServ fields (Value range: 0 to 63)
Common values for VoIP (default setting):
Wireless network (WLAN)
The device can also be connected to the local network over WLAN.
Only the Admin user role can make changes to settings. The User role has read-only access.
SIP 34 High service class for quick data flow conversion (accelerated process)
RTP 46 Highest service class for quick forwarding of data packages (accelerated
forwarding)
Do not change these values without contacting your network operator first.
A higher value does not necessarily mean a higher priority. The value determines
the service class, not the priority. The prioritisation procedure used in each case
meets the requirements of this class and is not necessarily suitable for transferring
voice data.
You need the security password for the WLAN on which you want to register the
phone.
If the device is connected over WLAN, it cannot be used as a switch for a PC connected
at the PC port.