Operation Manual

Gigaset Maxwell 3 PRO / LUG CA-IE-UK-US-International en / A31088-N4003-R101-4-19 / telephony.fm / 1/15/18

Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0

Making calls

Making a call

¤ . . . use to enter a number lift the handset

¤ lift the handset . . . use to enter a number Dial

Use + as a prefix for calls abroad: Press and hold key

Calls are initiated via the standard send connection if you do not select another option. To use

another VoIP connection:

¤ Select Line . . . use to select required connection Dial . . . use to enter the

number Dial

When entering the call number:

Incoming call during number entry:

The phone is connected to the LAN.

At least one VoIP connection has been set up and assigned to the telephone.

VoIP connections are set up by the administrator with the Web configurator or

assigned using a PABX.

Up to four VoIP connections (call numbers) can be assigned to the telephone. The first

connection to be set up is the standard send connection. The name of the standard

send connection is displayed in idle status at the top left of the display header

( p. 8).

No connection available: the following icon is shown in the display

Information about the telephone connections and the standard send connection:

Web configurator p. 47

Using the speaker to make calls:

¤ Press the Handsfree key

or: Enter the number Press

Using the headset to make calls:

¤ Press the Headset key

You can switch over at any time during the conversation.

In the following instructions, the icon also always stands for or .

Deleting incorrectly entered numbers to the left of the cursor:

Transferring a number to the local directory: ¤ ( p. 26)

Cancel dialling:

¤ End

Accept the call:

¤ Accept

Reject the call:

¤ Reject