Operation Manual

16
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Making calls
Gigaset Maxwell 3 PRO / LUG CA-IE-UK-US-International en / A31088-N4003-R101-4-19 / telephony.fm / 1/15/18
Incoming calls
An incoming call is indicated by ringing, by a display on the screen and by the flashing Status
LED.
The display shows
Protection from incoming calls
Activating/deactivating the ringtone
An incoming call is not signalled by ringing, but is displayed on the screen.
Switching the ringtone on/off: Press and ho
ld the Star key
Ringtone is switched off: the follo
wing icon appears on the display
Switching the alert tone (beep) on/off
Switch on an alert tone (beep) instead of the ringtone:
¤ Press and hold the Star key press Beep within 3 seconds . . . the following icon
appears in the status line
Switching off the alert tone: Press and hold the Star key
Incoming Call in the header
the caller's name if it has been stored in the
directory
the caller's number if it has been transmitted
( p. 15)
the line on which the call is coming in on
a picture of the caller, if one has been transmitted
(CNIP)
Accepting the call:
¤ lift the handset
Switching the ringtone off:
¤ Silence
Rejecting the call:
¤ Reject
If the call is a ringback, Ringback is displayed in the header.
When a call comes in, the system looks for a matching entry in the local directory. If
the number is not found there, other directories are searched, if any have been
configured.
Ringtone silencing for anonymous calls: p. 32.
Incoming Call
SilenceReject
12:15
via 1 IP1
Peter Smith
089123456789
089123456789
) (
)
(