Operation Manual

Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Making calls
Gigaset Maxwell 3 PRO / LUG CA-IE-UK-US-International en / A31088-N4003-R101-4-19 / telephony.fm / 1/15/18
Displaying information
¤ Info
Ending a call
¤ Replace the handset
Talking with several participants on the telephone
Accepting/rejecting Call Waiting
Another call comes in during a conversation. The call is signalled in the display and by the Call
Waiting tone. Call Waiting is displayed in the header.
Accepting the call:
¤ Accept . . . the connection to the waiting participant is made. The first participant is put on
hold and hears some on-hold music.
Rejecting the call:
¤ Reject
Permit/prevent Call Waiting
Permit or prevent Call Waiting during a call for all or for certain lines.
¤ . . . use to select Select Services OK Call Waiting OK if
necessary, press to select line Change ( = Call Waiting is permitted)
Two simultaneous incoming calls
When there are two simultaneous incoming calls, both are shown on the display.
¤ . . . Use to select the call you want to accept Pick up the receiver . . . The required
connection is established.
The other call is handled as a waiting call.
Function keys assigned: The assignment of the function keys is displayed ( p. 43)
unction keys not assigned: Information about the device is displayed ( p. 36)
The PABX or the provider supports this function and the function is activated on the
telephone ( p. 39).
Define settings for Call Waiting with the Web configurator p. 39