Operation Manual

Gigaset Maxwell 3 PRO / LUG CA-IE-UK-US-International en / A31088-N4003-R101-4-19 / telephony.fm / 1/15/18
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Making calls
Call divert
Incoming calls are diverted to another line or a network mailbox. For every phone connection,
you can set up call diverts for
Activating call divert
¤ . . . Use to select Select Services OK Call Divert OK . . . if
necessary, use to select a connection OK
When call divert is to apply:
¤ All Calls / When Busy / No reply OK
Where the call is to be forwarded to:
¤ Phone Number Enter the number Save
¤ Voice Mail Save . . . Calls are forwarded to the answer machine assigned to the
In idle status, the active call divert and the destination for the diverted call are shown on the
Disabling call divert
¤ . . . Use to select Select Services OK Call Divert OK . . . Use
to select the connection as required . . . Use to select the divert type (All Calls / When
Busy / No reply) OK Off Save
All Calls Calls are diverted immediately
When Busy Calls are diverted if the line is busy
No reply Calls are diverted if no one picks up after several rings
The PABX or the provider supports this function.
f calls are diverted to an answer machine, this must be set up by the administrator
from the Web configurator.
A No reply call divert becomes active after 120 seconds as standard. You can change
the delay time from the Web configurator ( p. 40)
Set up call diverts from the Web configurator: p. 40