Operation Manual

34
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Basic settings
Gigaset Maxwell 3 PRO / LUG CA-IE-UK-US-International en / A31088-N4003-R101-4-19 / settings.fm / 1/15/18
Brightness
The brightness can be set at 10 levels.
¤ . . . use to select Settings OK Display OK Brightness OK . . .
the current setting is shown graphically . . . use to select the brightness required
Save
Colour scheme
The display can appear in a range of colour combinations.
¤ . . . use to select Settings OK Display OK Colour Scheme OK
. . . use to select required colour scheme Select ( = selected)
Language
Set the language for the display screen.
¤ . . . use to select Settings OK Language OK . . . use to select
language Select ( = selected)
Local network
Display network settings for the telephone.
¤ . . . use to select Settings OK Local Network OK
Changing the display settings with the Web configurator: p. 42
Setting the display language with the Web configurator: p. 42
IP Address Type: static or dynamic
dynamic The telephone obtains its IP address automatically from
a DHCP service in the network (the router, for example).
The following fields show the current settings. These
settings cannot be changed.
static The telephone is provided with a permanent IP address.
The administrator makes the network settings using the
other fields.
IP Address: The phone's IP address in the local network.
Subnet Mask: The subnet mask for the local network. It specifies how many parts of
the IP address make up the network prefix and how many parts make up
the device address. The network prefix must be the same for all the
devices in the local network.
Standard Gateway: IP address of the system in the local network which assigns the address
and forwards information to other networks. This is frequently a router.