Operation Manual

Gigaset Maxwell C / LHSG IM - IE-UK-International en / A31008-N4007-R101-1-X119 / applications_1_HX.fm / 4/26/18
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Sound profiles
Availability and operation of the functions
may differ on your telephone.
29
Sound profiles
The telephone has sound profiles for adapting the handset to the environmental conditions:
Profile Loud, Profile Silent, Profile Personal. You can use the Do not disturb pr
ofile to prevent
the handset signalling an incoming call.
¤ Use to switch between the profiles . . . the profile is changed straight away without a
prompt
Profile Do not disturb
Activating/deactivating quickly Press and hold the key
The idle display shows "Do not disturb" active. The LED on the Profile key lights up.
Incoming calls are not signalled but show up in the call list as missed calls.
Most messages are blocked. Exceptions: Appointments, alarm clock and anniversaries.
Sound profiles
The profiles are set as follows by default:
Activate alert tone for an incoming call for P
rofile Silent: after switching to Profile Silent press
the display key Beep . . . the icon appears in the status bar
An incoming call occupies a line even if it is not signalled. If all the lines on the base are
occupied, calls cannot be made.
If a call arrives while you are using the telephone, the handset can return to idle status
(depends on the base).
Default setting Profile
Loud
Profile Silent Profile
Personal
Ringtone On Off On
Ringtone volume Internal 5 Off 5
External 5 Off 5
Handset volume Receiver 5 3 3
Handsfree 5 3 3
Advisory tones Key click Yes No Yes
Confirmation
tone
Yes No Yes
Changes to the settings listed in the table:
apply in the Loud and Silent profiles as long as the profile is not changed.
are permanently saved in Profile Personal for this profile.