Operation Manual

Gigaset Maxwell C / LHSG IM - IE-UK-International en / A31008-N4007-R101-1-X119 / settings_HS.fm / 4/26/18
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Setting the handset
Availability and operation of the functions
may differ on your telephone.
49
Handset update
The handset supports firmware updating via the DECT radio link to the base/router
(SUOTA = Software Update Over The Air).
If new firmware is available for the handset a message to this effect will be displayed.
¤ Start the firmware update with Ye s .
Start the firmware update manually:
¤ . . . use to select Settings OK System OK Handset
Update OK Update OK OK . . . if there is new firmware, the update will start
Resetting the handset to the default settings
Reset any individual settings and changes that you have made.
¤ . . . use to select Settings OK System OK Handset
Reset OK Ye s . . . the handset's settings are reset
The base/router to which the handset is registered must also support this function
( wiki.gigasetpro.com
)
If your base/router does not support this function, you can also update the firmware
via a USB cable and Gigaset Quick Sync.
The update process may take up to 30 minutes. During this time, only restricted
handset use is available.
The following settings are not affected by a reset
• Registration of the handset to the base station
• Date and time
• Directory entries and call lists