Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Cover_front.fm / 29.08.2016 N720 DECT IP Multicell System Version 2, 06.08.
Version 2, 06.08.2010 Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Cover_front.fm / 29.08.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / intro.fm / 29.08.2016 Gigaset N720 DECT IP Multicell System ... Gigaset N720 DECT IP Multicell System ... ... the DECT IP multicell system for Internet telephony and unrestricted mobility when making calls in small and medium-sized companies.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720IVZ.fm / 29.08.2016 Table of Contents Table of Contents Gigaset N720 DECT IP Multicell System ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 First steps . . . . . . . . . . . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720IVZ.fm / 29.08.2016 Table of Contents Displaying messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Using the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 eMail notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720IVZ.fm / 29.08.2016 Table of Contents Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / introduction.fm / 29.08.2016 Introduction Introduction Gigaset N720 DECT IP Multicell System is a DECT multicell system for connecting DECT base stations to a VoIP PABX. It combines the options of IP telephony with the use of DECT telephones.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / introduction.fm / 29.08.2016 Introduction u Gigaset handsets Version 2, 06.08.2010 – Up to 100 handsets can be connected and 30 DECT connections can be made simultaneously (calls, eMail checks, connections to online directories and the Info Centre). For information on handset functions in relation to Gigaset base stations, visit wiki.gigasetpro.com.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / introduction.fm / 29.08.2016 Introduction Planning your DECT wireless network Version 2, 06.08.2010 Careful planning of your DECT wireless network is the prerequisite for successful operation of the Gigaset N720 DECT IP Multicell System with good call quality and adequate call options for all subscribers in all the buildings and areas belonging to the PABX.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / security.fm / 29.08.2016 Safety precautions Safety precautions device cannot be used in the event of a power failure. In case of a power failure it aThe is also not possible to make emergency calls. Read the safety precautions and the user guide before use. Do not use the devices in environments with a potential explosion hazard (e.g. paint shops). The devices are not splashproof.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps First steps Checking the package contents Or 1 2 §§1§§ One Gigaset N720 DM PRO DECT Manager or §§2§§ One Gigaset N720 IP PRO base station Please note The Gigaset N720 DECT IP Multicell System devices are powered by Power over Ethernet (PoE).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps Installing base stations and DECT Manager – procedure Caution Read the "Gigaset N720 DECT IP Multicell System - Site Planning and Measurement Guide" before you start installing the devices.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps Connecting the power cable Please note This connection is only required if the device is not powered via PoE. If you do not use PoE, the power adapter must be plugged in at all times for operation, as the device will not work without a power supply. §§1§§ Insert the power cable of the power adapter into the connection socket at the rear of the device.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps Connecting devices to the local network and to the Internet Data protection notice When the device is connected to the Internet, it automatically contacts the Gigaset support server to make it easier for you to configure the devices and to enable communication with Internet services.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps §§1§§ Insert a plug from the Ethernet cable supplied (Cat 5 with 2 RJ45 modular jacks) into the LAN connection socket at the rear of the device. §§2§§ Insert the second Ethernet cable plug into a LAN socket for your local network or on the router. Version 2, 06.08.2010 §§3§§ Insert the cable into the cable recess provided.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps Mounting devices on the wall Gigaset N720 IP PRO base stations and Gigaset N720 DM PRO DECT Manager are intended for wall mounting. 80 mm 50 mm Version 2, 06.08.2010 You can fix the device to the wall with two or four screws: ¤ Drill holes with the following spacing: Horizontal: 50 mm, vertical: 80 mm. ¤ Affix wall plugs and secure the screws. Let the screws protrude by approx. four mm.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps Registering base stations ¤ Open the Web configurator and log in (£ page 59). ¤ Open the Settings ¢ Network and Connections ¢ Base Station Registration page (£ page 67). ¤ The window shows a list of all DECT base stations connected to the local network which have not yet been registered.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps Registering the handset Note If auto-provisioning is provided by the manufacturer, operator or supplier of the telephone system, handsets are automatically registered to the DECT multicell system and assigned to a VoIP connection. In this case, you need to carry out only step b) in the steps described below.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps Displays u Reception between the base station and the handset: – Good to poor: Ð i Ñ Ò – No reception: ¼ (red) If several base stations are within range, the connection quality to the base station with the best reception is displayed.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / starting.fm / 29.08.2016 First steps How to proceed Now you have successfully set up your phone, you will want to adapt it to your personal requirements. Use the following guide to quickly locate the most important subjects. Information on ... ... is located here.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / using.fm / 29.08.2016 Operating information Operating information Light emitting diodes (LED) LEDs on the DECT Manager DECT Power/LAN VoIP CALL Version 2, 06.08.2010 RESET From top to bottom Connection status to the base stations Power supply status If the power supply is OK, the LED indicates the LAN connection status.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / using.fm / 29.08.2016 Operating information LEDs on the base stations The Gigaset N720 IP PRO base stations contain two DECT modules with separate status displays. DECT 1 Power/LAN Power/LAN DECT 2 RESET From top to bottom Status of DECT module 1 Power supply status If the power supply is OK, the LED indicates the LAN connection status.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / using.fm / 29.08.2016 Operating information Resetting the device settings The devices have a reset button that you can use to restore the default device settings. This button is below the LEDs on the front of the device. Reset button Resetting the device to factory settings Caution This function resets all the settings you have made. The procedure deletes the saved data from the base stations and handsets.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / using.fm / 29.08.2016 Operating information Resetting to static IP addresses ¤ Press the reset button and hold it for four seconds. ¤ Release the reset button. ¤ Press the reset button again for four seconds. ¤ Release it again. The reset is carried out. The IP configuration is now set as follows: Parameter Value for the reset IP address type Static IP address DECT Manager 192.168.143.1 Subnet mask 255.255.0.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / using.fm / 29.08.2016 Operating information Menu tree (handsets) You use the functions of your Gigaset N720 DECT IP Multicell System via a registered handset. The functions of the telephone system are added to the handset menu, as shown below. Handset-specific functions, e.g., local directory or organiser, are not described here. Information about this will be found in the relevant handset user guide.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / using.fm / 29.08.2016 Operating information Understanding the operating steps The operating steps have been shortened and are based on a Gigaset SL610H PRO handset. Example: The display: v ¢ Ç Select Services ¢ Do not disturb (³ = on) means: ¤ Press right on the control key v to open the main menu. ¤ Press right, left, down and up on the Settings Ç È É control key p to navigate to the Select Services submenu.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / using.fm / 29.08.2016 Operating information The change is effective immediately and does not need to be confirmed. Settings Next Call Anon. Call Divert Call Waiting Do not disturb ³ Ringback Off Version 2, 06.08.2010 Back Change ¤ Press the key below §Back§ to skip back to ¤ the previous menu level. Or Press and hold the end call key a to return to idle status.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016 Making calls Making calls You can make calls using any handset registered to your Gigaset N720 DECT IP Multicell System. Prerequisite: You are located in the cell of at least one of the base stations registered to the telephone system. The cells of the base stations together form the DECT wireless network of the telephone system.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016 Making calls Please note u You can cancel the dialling process with the end call key a. u You can see the duration of the call while the call is in progress. u Dialling using the directories ( page 38) or the call and redial lists ( £ £ page 43) saves you entering numbers repeatedly. u If all the Gigaset N720 DECT IP Multicell System connections are busy, the error message Not possible. is displayed.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016 Making calls Accepting a call An incoming call on a Gigaset handset is indicated in three ways: by ringing, by a display on the screen and by the flashing d and c keys. You can accept the call on the handset in the following ways: ¤ Press the talk key c to make the call via the receiver. ¤ Press the speaker key d to make the call via the loudspeaker.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016 Making calls Display with CNIP Ø«Ú Doe, John, Berlin Reject If you have CNIP, the CNIP information registered with your provider for the caller's number will be displayed, e.g., the name and, if applicable, the location. CNIP text, e.g.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016 Making calls Call waiting during a call If you get another call while conducting a call, you will hear the call waiting tone (short tone). If you have calling line identification (CLIP), the number of the waiting caller or the corresponding directory entry is displayed. The caller will hear the ringing tone. You have the following options: Rejecting a call §Reject§ Press the display key.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016 Making calls Initiating a consultation call When you are conducting a call, you can call a second participant at the same time to hold a consultation call or carry out a conference call between all 3 participants. You are conducting a call: S Press the Recall key. This is only possible if the Recall key is enabled for call transfer (£ page 85). Or: §Ext. Call§ Press the display key.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016 Making calls Transferring a call to another subscriber You can transfer (connect) a call to another subscriber if your PABX/provider supports this function. You are conducting a call: ¤ Set up a consultation call (£ page 33). When the participant answers: ¤ Announce the call, if necessary. a Press the end call key. The call on hold is transferred to the other participant's number.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016 Making calls Gigaset HD-voice – telephony with brilliant sound quality Your Gigaset telephone supports the G.722 wideband codec so you can use it to make calls with brilliant sound quality (High Definition Sound Performance). The following are prerequisites for wideband connections on your telephone: – You make the call from a wideband-capable handset. – The G.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / netservices.fm / 29.08.2016 Setting phone functions Setting phone functions Activating/deactivating call waiting for calls If the function is activated during a call, you will hear a call waiting tone to signal that another caller is trying to get through (£ page 32). When call waiting is deactivated, the caller will hear the busy tone if you are already making a call.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / netservices.fm / 29.08.2016 Setting phone functions Do not disturb Version 2, 06.08.2010 You can activate the Do Not Disturb (DND) function if you do not want to receive any calls and you do not want the phone to ring, if your PABX/provider supports this function. You can still make calls when this function is activated. v ¢ Ç Select Services ¢ Do not disturb Status Select On/Off to activate/deactivate this function.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / directories.fm / 29.08.2016 Using directories Using directories The options are: u The (local) directory for your handset (see handset user guide) u Public online and classified directories (£ page 40) u Online directories, provided by a PABX, e.g., a corporate directory and/or a private directory (£ page 39) The directories available are defined by the Web configurator of the DECT Manager (£ page 89).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / directories.fm / 29.08.2016 Using directories Using corporate directories You can use directories made available by a server in the corporate network on your handset. The following formats are possible: u Directory in LDAP format (LDAP = Lightweight Directory Access Protocol) u Directory in XML format u Personal directory in XML format Prerequisite: u The directories are available in the valid XML or LDAP format.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / directories.fm / 29.08.2016 Using directories Using online directories You can use public online directories (online directories and classified directories, e.g., "Yellow Pages"). Prerequisite: The online directories are enabled on the DECT Manager (£ page 89) and the DECT Manager can access the Internet via its LAN connection. Exclusion of liability This service is country-specific.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / directories.fm / 29.08.2016 Using directories A list of the cities/locations found is displayed if the search returns more than one result: q Select city. If the name of a city/location is longer than one line, it is abbreviated. Select §View§ to view the complete name. If no matching city is found: press §Change§ to change the search criteria. The entries for Category/Name and City are copied and you can change them.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / directories.fm / 29.08.2016 Using directories You have the following options: ¤ You can scroll through the list with q. ¤ Press the display key §View§. This displays the full details of the entry (name, category where applicable, address, telephone numbers). You can scroll through the entry with q. Use §Options§ to access the following options: Refine Search Refine search criteria and restrict hit list (£ page 42).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / directories.fm / 29.08.2016 Using the call lists Using the call lists The following call lists are available: All Calls Outgoing Calls Accepted Calls Missed Calls All outgoing, accepted and missed calls. The last 20 numbers dialled (redial list). Calls that were answered (max. 15). Calls that were not answered (max. 15).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / directories.fm / 29.08.2016 Using the call lists If the caller has activated CLIP (= Calling Line Identification Presentation), the caller's phone number is identified. The caller can then be identified by this number if he or she is saved in a directory. Displaying detailed information §§View§§ Press the display key. The information available is displayed, with the phone number as a minimum.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / MWI.fm / 29.08.2016 Displaying messages Displaying messages The following types of messages are displayed: u Voice mails on network mailboxes (see below) u Missed calls (£ page 43) u eMails (£ page 47) u Missed appointments (see user guide for your handset) The message key f provides access to all your messages.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / MWI.fm / 29.08.2016 Displaying messages Playing back a message Calling the network mailbox via fast access Press and hold. You are connected straight to the network mailbox. d If necessary, press the speaker key. You will hear the network mailbox announcement. Calling the network mailbox via the menu v ¢ Ì Voice Mail ¢ Play Messages You are connected straight to the network mailbox.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / MWI.fm / 29.08.2016 Displaying messages eMail notifications You can receive eMail-messages on your handset if the name of the incoming eMail server and your personal access data (account name, password) have been stored on the DECT Manager using the Web configurator and you have specified that you want to be notified when a new eMail arrives (£ page 81).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / MWI.fm / 29.08.2016 Displaying messages New unread messages appear above old read messages. The most recent entry appears at the head of the list. The following details are displayed for each eMail: name or eMail address of the sender (one line, abbreviated if necessary) and date and time (date and time will only display correct values if sender and recipient are located in the same time zone).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / MWI.fm / 29.08.2016 Displaying messages Messages when establishing a connection The following problems may occur when connecting to the incoming eMail server. The messages are displayed in the display for a few seconds. Server not accessible The connection to the incoming eMail server could not be established.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / MWI.fm / 29.08.2016 Displaying messages Example display on the Gigaset SL610H PRO handset: E-mail Subject: 1 Invitation Text: 2 Hi Anna, I passed my test! Back Options 1 Subject of the eMail message. A maximum of 120 characters are displayed. 2 Text of the eMail message (abbreviated if necessary). a Press the end call key to return to the incoming message list.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / MWI.fm / 29.08.2016 Displaying messages Deleting eMail messages Version 2, 06.08.2010 Prerequisite: You have opened the incoming eMail list (£ page 47) or the header or sender's address for an eMail is displayed (£ page 49): §Options ¢ Delete Select and press §OK§. §Yes§ Press the display key to confirm the security prompt. The eMail is deleted from the incoming eMail server.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Info_Center.fm / 29.08.2016 Info centre – continuous Internet access from your phone Info centre – continuous Internet access from your phone You can use your phone to request info services provided specifically for the phone. The services available are set via the Web configurator on the DECT Manager (£ page 88). Info services can be: u Online content from the Internet u Information provided about the PABX.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Info_Center.fm / 29.08.2016 Info centre – continuous Internet access from your phone Messages when loading requested information The information is loaded from the Internet. Wait a few seconds until the information is displayed. The display shows Please wait.... If the information for an info service cannot be displayed, one of the following messages appears: Requested page can’t be reached.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Info_Center.fm / 29.08.2016 Info centre – continuous Internet access from your phone Operating the info centre Depending on the type of info service requested, you can perform the following operations: Scrolling within an info service ¤ You can use s to scroll downwards within an info service, and t to scroll up (back). Skipping back to the previous page ¤ Press the left display key.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Info_Center.fm / 29.08.2016 Info centre – continuous Internet access from your phone Depending on the provider, if you press §call§, u The number is dialled directly u The number appears first in the display, in which case you must first confirm the number before it is dialled. ¤ If you press §Yes§, the number is dialled. Or: ¤ If you press §No§, the page is displayed again with the hyperlink. The number will not be dialled.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / settings.fm / 29.08.2016 System settings and settings on the handset System settings and settings on the handset System settings are made via the Web configurator on the DECT Manager (£ page 58) and cannot be changed using the handsets. This applies in particular for: u Registering and de-registering the handset to the telephone system, handset name. u All settings for the VoIP account used by a handset for calls.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / settings.fm / 29.08.2016 System settings and settings on the handset More Functions... Select and press §OK§; you can then also select from the following additional functions: Call Lists Withhold Number Call Divert PBX Control E-mail Info Centre Net Directories Central Net Dir. Public Net Dir. Assign the call lists menu to a key. v ¢ Ê Call Lists Restrict Calling Line Identification for the next call (£ page 34).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Configuring the system on the DECT Manager Use the Web configurator to set up your Gigaset N720 DECT IP Multicell System and configure your DECT network. u Set up the DECT network, register and synchronise the base stations. u Make basic settings for the VoIP connections and register and configure the handsets you wish to use in the DECT network.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager If connecting to www.gigaset-config.com does not produce any results: ¤ Establish the DECT Manager's current IP address. ¤ Enter http:// and the current IP address for the DECT Manager in the address field of the Web browser (for example: http://192.168.2.10). Please note The IP address is assigned dynamically via your local network's DHCP server.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Please note £ u You should change the password for security reasons ( page 71). u If you do not make any entries for a lengthy period (approx. 10 minutes), you are automatically logged off. The next time you try to make an entry or open a Web page, the login screen is displayed again. Enter the password again to log back in.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Menu bar The Web configurator menus are displayed as tab pages in the menu bar. You will find an overview of the Web configurator menu on £ page 63. The following menus are available: Settings The menu allows you to make Settings on the DECT Manager. If you select the Settings menu, a list of this menu's functions is displayed in the navigation area.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Working area Depending on the function selected in the navigation area, information or dialogue boxes are displayed in the working area that allow you to make or change your DECT network settings. Making changes You can make settings via input fields, lists or options. u There may be restrictions regarding the possible values for a field e.g.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Opening Web pages A brief outline of how to navigate to the individual Web configurator functions is given below. Example Defining dialling plans: Settings ¢ Telephony ¢ Dialling Plans To open the Web page, proceed as follows after login: ¤ Select the Settings menu in the menu bar. ¤ Click the Telephony function in the navigation area.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Connecting the DECT Manager to the local network (LAN/router) You can find the functions for connecting to the LAN on the Web page: Settings ¢ Network and Connections ¢ IP Configuration In most cases, special settings are not required to connect the DECT Manager to the local network.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Please note: – The IP address must be included in the address block used by the router/gateway for the local network. The valid address block is defined by the IP address for the router/gateway and the subnet mask (see example). – The IP address must be unique across the network, which means that it must not be used by another device connected to the router/gateway.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Configuring a HTTP proxy ¤ Select whether you want to release a separate proxy server in the network for your DECT Manager. ¤ If Yes, enter the IP address for the proxy server in the Proxy server address field. ¤ The default setting for the Proxy server port is 80. Change this if your server uses another port.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Prioritising VLANs Data packets from VLANs can be prioritised. The priority determines whether the data traffic from a VLAN is given preferential treatment by the network components. You can define the priority for voice and data separately.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager The Own Base Station Data window opens to configure this base station. Version 2, 06.08.2010 ¤ Enter a unique identifier for the base station in the Name / Location field (e.g., Ground Floor West). This name should make it easier to assign the base station within the logical and spatial structure of the DECT network.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager If you select the Obtained automatically option for the IP address, you will not need to enter any further details. If you are using static IP addresses on your local network, you will also need to enter an IP address for each base station (£ page 64).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager ¤ If you wish to remove the base station from the network, click on Delete base station. ¤ If you delete the base station, all data for this base station will be deleted from the DECT Manager. Click on Set to apply the changes on this page.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Base stations – displaying events This page displays counters for diagnostic purposes relating to various events that affect the base stations, e.g. active radio connections, handovers, unexpectedly terminated connections to a handset etc.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager The Invalid certificates list contains the certificates received from servers that have not passed the certificate check when establishing a connection, and certificates from the Server certificates/CA certificates lists that have become invalid (e.g., because they have expired).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Configuring VoIP providers This page allows you to create a list of systems providing VoIP connections and other services for your phones. You can enter the following: u Your company's VoIP PABX(s) u Public providers from which you have requested VoIP services You can configure up to ten different VoIP PABXs or VoIP providers.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Entering provider data Version 2, 06.08.2010 Enter data manually here for a VoIP PABX or a provider for which there is no existing profile. You can obtain the data from the PABX administrator or your VoIP provider. ¤ Enter the IP address for the VoIP PABX in the Proxy server address field.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Configuring handsets You can use the Web configurator to register all handsets on the DECT network and for a VoIP connection. You can edit the settings for handsets that are already registered, deactivate or delete them and make further settings e.g., for using directories and network services. Settings ¢ Handsets Version 2, 06.08.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Registering a handset Please note: u Each handset is assigned a VoIP account. u Registration in the DECT network and for the VoIP connection is started at the same time. u If you assign a different VoIP account to a handset that is already registered, the connection already configured will be overwritten.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Network Mailbox Configuration: ¤ Enter the Call number or SIP name (URI) for the network mailbox and activate the network mailbox. ¤ If these settings are to apply to all configured handsets, click on OK. Settings for Codecs The voice quality of VoIP calls is determined by the Codec used for the transmission. To increase the quality, more data must be transmitted.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Export and import local Directory The Web configurator has the following options for editing and coordinating the directories of the registered handsets. u Save the local directory to a PC. Entries are stored in vCard format in a vcf file on the PC. You can download these files onto every registered handset.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Transfer rules The directory entries from a vcf file that are loaded onto the handset will be added to the directory. If an entry already exists for a name, it will either be supplemented or a new entry for the name will be created. The process will not overwrite or delete any phone numbers.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Receiving eMail ¤ If the DECT Manager is to check the receipt of eMails for the handset, enter the data for ¤ ¤ ¤ the eMail account here. Activate the option Yes for Check for new email. Select whether the notification should be transmitted via a secure connection. If these settings are to apply to all configured handsets, click on OK.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Additional settings for making a call The following settings are available for telephony on all handsets.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager ¤ Save an access code and specify when the phone numbers should be automatically ¤ ¤ prefixed with the digits. You can choose between Always, Never For net directories (only when selecting from an online directory), For call lists (only when dialling from the call list or an answering machine list), For net directories and call lists.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Tone selection Tones (e.g., dialling tone, ring tone, busy tone or call waiting tone) vary from one country or region to another. You can choose from various tone groups for your phone system. ¤ From the Tone Selection list, select the country or region whose ring tones are to be used for your phone. ¤ Click on Set to save your settings on the page.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager The G.722 codec (wideband connection) enables high voice quality, but only a maximum of four simultaneous connections per base station. ¤ Enable the G.722 codec to permit wideband transmission for all handsets on the DECT network. Enabling the G.729 codec The G.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager You can expand or change the settings for call transfer as follows: u Transfer call by on-hook: The two participants are connected with one another when you press the end call key. The intermediary's connections with the participants are terminated.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Please note Settings for the R key are only possible if – The R key has not been activated for call transfer (£ page 86) and – SIP Info has been activated (£ page 84). Defining local communication ports (listen ports) for VoIP This setting only has to be changed if the port numbers are already being used by other subscribers on the LAN.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Info services You can set up various info services provided via the PABX, Gigaset.net or a different server. The info services can be opened via the menu on the handsets (£ page 52). The VoIP account's SIP ID and the handset's DECT ID are transferred when requesting info services. This allows the info service server to offer individual settings for each handset.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Online directories You can make various online directories available so that they can be used and displayed on the handsets: u Public Online Directories A number of well-known providers are available here. Each provider can provide a telephone directory and a classified directory. You can also enter an additional provider.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager ¤ Enter the provider's details and a name for the provider and the directories. You can Version 2, 06.08.2010 choose between the White and Yellow Pages. ¤ Click on Set to save your settings on the page. The online directories page is displayed again. The new provider has now been entered in the list. ¤ Activate this provider.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Corporate directories If you wish to use a company directory on your telephone, you must activate it on the Web configurator. You may use a directory in LDAP and/or XML format. Settings ¢ Online Directories LDAP directory (Lightweight Directory Access Protocol) The directory is provided via a LDAP server.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Settings for LDAP directories To search in an LDAP company directory, you can set the search criteria and the format of the information for the found entries. Attributes A range of attributes are defined in the LDAP database for a directory entry, e.g. surname, first name, telephone number, address, company, etc.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Example Entry data on the LDAP server: displayName Peter Black givenName Peter sn Black ...
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Examples: AND operation: OR operation: Combined operation: (& (givenName=%) (mail=%)) Searches for entries in which the first name and mail address begin with the characters entered by the user. (| (displayName=%) (sn=%)) Searches for entries in which the display name or surname begins with the characters entered by the user.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Device management Date and time By default, the DECT Manager is configured so that the date and time are transferred from a time server on the Internet.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Starting auto-configuration The Auto Configuration is used to update system settings. It can be started if the manufacturer, operator or supplier of the PABX provides a corresponding file and a code. Provider and PABX profiles A profile contains important settings for services and functions on your telephone system.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Rebooting the system Your Gigaset N720 DECT IP Multicell System can be set to automatically reboot regularly at a convenient time if required as a result of a system check. This does not normally cause the system to become unstable, but if an unforeseeable system error should occur, you can reboot the system manually.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager System Log (SysLog) The system report (SysLog) gathers information about selected processes performed by the DECT Manager and base stations during operation and sends this to the configured SysLog server.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager You can load new firmware (update) or restore the firmware to an earlier version (downgrade). ¤ Specify when an update or downgrade should be performed. Immediately The update/downgrade is performed when you click the Update firmware or Start downgrade button. Later The update/downgrade is performed at the time you indicate in the lines underneath.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016 Configuring the system on the DECT Manager Firmware downgrade You have the following options: u You can reload the firmware version that was loaded before the last update on the DECT Manager. u You can reload the firmware version that was loaded by default onto the DECT Manager. The selected firmware is reloaded and the current firmware is overwritten.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / diagnose.fm / 29.08.2016 Diagnostics Diagnostics The web configurator for the DECT manager (£ S. 58) offers different tools for monitoring the operation and diagnosis in the event of problems occurring.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / diagnose.fm / 29.08.2016 Diagnostics Displaying of base station events Settings ¢ Network and Connections¢ Base Station Events This page displays counters for diagnostic purposes relating to various events that affect the base stations, e.g. active radio connections, handovers, unexpectedly terminated connections, etc. for both DECT module 1 and module 2.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / diagnose.fm / 29.08.2016 Diagnostics System dump In case of error, you can create a system dump and transmit to a Gigaset server for diagnostic purposes via the Gigaset service. ¤ Log in to the Web configurator £ S. 59 ¤ Change the URL at: http:/sysdump.html The MAC address for the system and the name of the Gigaset server are displayed. ¤ Click on Send. The information is transmitted to the Gigaset server.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / diagnose.fm / 29.08.2016 Diagnostics Information concerning a connection: ¤ Move the mouse pointer over a connection. The RSSI value for the connection is displayed.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / appendix.fm / 29.08.2016 Customer care Customer care Do you have any questions? For quick assistance, please refer to this user guide or visit gigasetpro.com. Our Gigaset pro reseller will be happy to help with any further questions related to your Gigaset pro unit Questions and answers If you have any questions when using your phone, please contact us at wiki.gigasetpro.com.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / appendix.fm / 29.08.2016 Customer care The connection to a participant on hold is automatically terminated after a short time. ¥ The session timer on the VoIP PABX is set for an insufficient time. Check the timer setting and increase it if necessary. You hear an error tone (descending tone sequence) when keying an input. ¥ Action has failed/invalid input. Repeat the process.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / appendix.fm / 29.08.2016 Customer care Information on operating Gigaset VoIP telephones with routers with Network Address Translation (NAT) Generally speaking, no special telephone or router configuration is required when operating a Gigaset VoIP phone with NAT router. The configuration settings described in this section are only necessary if you encounter one of the following problems.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / appendix.fm / 29.08.2016 Customer care 2. Setting port forwarding on the router To ensure that your specified SIP and RTP port numbers are used on the WAN interface with the public IP address, you must define port forwarding rules for the SIP and RTP ports on the router. To define port forwarding on the router, proceed as follows: The terms used below may vary from router to router.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / appendix.fm / 29.08.2016 Customer care Checking service information If you contact Customer Care, you may need the base's service information. Prerequisite: You have assigned a line (try to establish a call, make a call). Please note You may need to wait a few seconds before §Options§ appears on the display §Options§ ¢ Service Info Version 2, 06.08.2010 Confirm selection with §OK§.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / appendix.fm / 29.08.2016 Environment Environment Our environmental mission statement We, Gigaset Communications GmbH, bear social responsibility and are actively committed to a better world. Our ideas, technologies and actions serve people, society and the environment. The aim of our global activity is to secure sustainable life resources for humanity.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / appendix.fm / 29.08.2016 Appendix Appendix Care Wipe the unit with a damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth. This can cause static. Impairments in high-gloss finishes can be carefully removed using display polishes for mobile phones. Contact with liquid ! If the device has come into contact with liquid: §§1§§ Disconnect the power adapter. §§2§§ Allow the liquid to drain from the device.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / appendix.fm / 29.08.2016 Appendix Specifications Power consumption Gigaset N720 DM PRO (DECT Manager) Gigaset N720 IP PRO (Base station) 2.3 W Standby: 3.0 W Call: 3.1 W for one DECT connection 3.3 W for 8 DECT connections (narrowband) General specifications DECT Manager and base stations Power over Ethernet Gigaset N720 DM PRO: PoE IEEE 802.3af < 3.8 W (Class 1) Gigaset N720 IP PRO: PoE IEEE 802.3af < 6.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary Glossary A ADSL Asymmetric Digital Subscriber Line Special form of DSL. ALG Application Layer Gateway NAT control mechanism for a router. Many routers with integrated NAT use ALG. ALG lets the data packets in a VoIP connection pass and adds the public IP address of the secure private network. The router's ALG should be deactivated if the VoIP provider offers a STUN server or an outbound proxy.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary Client Application that requests a service from a server. Cluster Subdivision of a DECT network into groups (subnets) by a central management station (DECT Manager). All telephones in the network use the central functions of the PABX (VoIP configuration, directories, etc.).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary D DECT Digital Enhanced Cordless Telecommunications Global standard for wireless connection of mobile end devices (handsets) to telephone base stations. DHCP Dynamic Host Configuration Protocol Internet protocol that handles the automatic assignment of IP addresses to Network subscriber. The protocol is made available in the network by a server. A DHCP server can, for example, be a router.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary DSLAM Digital Subscriber Line Access Multiplexer The DSLAM is a switch cabinet in an exchange where all subscriber connectors converge. DTMF Dual Tone Multi-Frequency Dual tone multi-frequency dialling (DTMF). Dynamic IP address A dynamic IP address is assigned to a network component automatically via DHCP.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary Fragmentation Data packets that are too big are split into smaller packets (fragments) before they are transferred. They are put together again when they reach the recipient (defragmented). Full duplex Data transmission mode in which data can be sent and received at the same time. G G.711 a law, G.711 μ law Standard for a Codec. G.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary GSM Global System for Mobile Communication Originally a European standard for mobile networks. GSM can now be described as a worldwide standard. However, in the USA and Japan, national standards were previously more frequently supported.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary IP address A unique address for a network component within a network based on the TCP/IP protocols (e.g., LAN, Internet). On the Internet, domain names are usually assigned instead of IP addresses. DNS assigns the corresponding IP address to the domain name. The IP address has four parts (decimal numbers between 0 and 255) separated by full stops (e.g., 230.94.233.2).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary Music on hold Music on hold Music that is played while you are on a Consultation call or during Call swapping. The waiting participant hears music while on hold. N NAT Network Address Translation Method for converting (private) IP addresses to one or more (public) IP addresses. NAT enables the IP addresses of Network subscribers (e.g.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary Port Data is exchanged between two applications in a Network via a port. Port forwarding The Internet gateway (e.g., your router) forwards data packets from the Internet that are directed to a certain Port to the port concerned. This allows servers in the LAN to offer services on the Internet without you needing a public IP address.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary RFP Radio Fixed Part Base stations in a multicell DECT network. RFPI Radio Fixed Part Identity ID for a base station in a multicell DECT network. It includes the number (RPN) and an ID for the DECT Manager. A handset uses it to recognise the base stations it is connected to and the DECT network to which it belongs. Ringback when the call is not answered = CCNR (Completion of calls on no reply).
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary S Server Provides a service to other Network subscribers (Clients). The term can indicate a computer/PC or an application. A server is addressed via IP address/Domain name and Port. SIP (Session Initiation Protocol) Signalling protocol independent of voice communication. Used for establishing and ending a call. It is also possible to define parameters for voice transmission. SIP address See URI.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary TLS Transport Layer Security Protocol for encrypting data transmissions on the Internet. TLS is a superordinate Transport protocol. Transmission rate Speed at which data is transmitted in the WAN or LAN. The transmission rate is measured in data units per unit of time (Mbit/s). Transport protocol Controls data transport between two communication partners (applications). See also: UDP, TCP, TLS.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / Glossary.fm / 29.08.2016 Glossary VoIP provider A VoIP, SIP or Gateway provider is an Internet service provider that provides a Gateway for Internet telephony. As the phone works with the SIP standard, your provider must support the SIP standard. The provider routes calls from VoIP to the telephone network (analogue, ISDN and mobile) and vice versa. W WAN Wide Area Network Version 2, 06.08.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / accessories_SAG.fm / 29.08.2016 Accessories Accessories Power adapter You only need a power adapter if your devices are not powered by PoE (Power over Ethernet). EU: Item number: UK: Item number: C39280-Z4-C706 C39280-Z4-C745 Gigaset N720 SPK PRO (Site Planning Kit) Equipment for planning and analysing your DECT multicell system.
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720SIX.fm / 29.08.2016 Index Index A Access code . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Activating corporate directories . . . . . . . . . . . . . . . . 91 ADSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 ALG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Alternative options, Web configurator . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720SIX.fm / 29.08.2016 Version 2, 06.08.2010 Index Call manager . . . . . . . . . . . . . . . . . . . . . . . . . 80 Call restrictions . . . . . . . . . . . . . . . . . . . . . . . 82 Call swapping . . . . . . . . . . . . . . . . . . . . . 33, 113 Call transfer configuring . . . . . . . . . . . . . . . . . . . . . . . . . 85 Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Call waiting . . . . . . . . . . . . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720SIX.fm / 29.08.2016 Index private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 public . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 XML format . . . . . . . . . . . . . . . . . . . . . . . . . 94 Directory entry attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Directory file content (vCard format) . . . . . . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720SIX.fm / 29.08.2016 Index H Handover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 advanced settings. . . . . . . . . . . . . . . . . . . 77 assigning display keys . . . . . . . . . . . . . . . 56 assigning network mailbox . . . . . . . . . . 78 assigning online directories . . . . . . . . . . 77 configuring . . . . . . . . . . . . . . . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720SIX.fm / 29.08.2016 Index M MAC address . . . . . . . . . . . . . . . . . . . . . . . . . 119 MAC address cascading . . . . . . . . . . . . . . . . 13 mail, attribute . . . . . . . . . . . . . . . . . . . . . . . . . 92 Making calls accepting a call . . . . . . . . . . . . . . . . . . . . . 30 calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Maximum Receive Unit . . . . . . . . . . . . . . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720SIX.fm / 29.08.2016 Index Private IP address . . . . . . . . . . . . . . . . . . . . 121 Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Proxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Proxy-Server . . . . . . . . . . . . . . . . . . . . . . . . . 121 Public IP address . . . . . . . . . . . . . . . . . . . . . 121 Q Quality of Service . . . . . . . . . . . . . . . . . . . .
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / N720SIX.fm / 29.08.2016 Index Tone selection . . . . . . . . . . . . . . . . . . . . . . . . 84 Transmission Control Protocol . . . . . . . . . 123 Transmission rate . . . . . . . . . . . . . . . . . . . . 124 Transport Layer Security . . . . . . . . . . . . . . 124 Transport protocol . . . . . . . . . . . . . . . . . . . 124 Troubleshooting . . . . . . . . . . . . . . . . . . . . . 105 eMail. . . . . . . . . . . . . . . . . . . . .
GigasetGigaset N720 DECT N720IPDECT Multicell IP Multicell System System / engbt//engbt A31008-M2314-L101-6-7619 / A31008-M2314-L101-6-7619 / Cover_back.fm / Cover_back.fm / 29.08.2016 / 29.08.2016 Gigaset Communications GmbH Frankenstraße 2a, D-46395 Bocholt © Gigaset Communications GmbH 201 All rights reserved. Subject to availability. gigasetQSP.com Version 2, 06.08.
