Installation Instructions

99
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016
Version 2, 06.08.2010
You can load new firmware (update) or restore the firmware to an earlier version
(downgrade).
¤ Specify when an update or downgrade should be performed.
When the download is started, the device first checks whether the prerequisites are in
place for successfully downloading the firmware. The handsets lose their connection to
the base during the download and updating process. You can tell that the update has
been successful when the handsets re-establish the connection to the base.
Immediately The update/downgrade is performed when you click the Update
firmware or Start downgrade button.
Later The update/downgrade is performed at the time you indicate in the
lines underneath.
Please note
The DECT Manager firmware update can take up to ten minutes. Updating the
individual base stations takes approx. 2–3 minutes. Do not disconnect the devices
from the local network (or the power supply) during this time.