Installation Instructions

32
Making calls
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / telephony.fm / 29.08.2016
Version 2, 06.08.2010
Call waiting during a call
If you get another call while conducting a call, you will hear the call waiting tone (short
tone). If you have calling line identification (CLIP), the number of the waiting caller or the
corresponding directory entry is displayed. The caller will hear the ringing tone.
You have the following options:
Rejecting a call
§Reject§ Press the display key.
The call waiting tone is turned off. You remain connected to the first participant. The other
caller will hear the busy tone.
Accepting the call/putting the first party on hold
§Accept§ Press the display key.
You are connected to the caller. The first call is placed on hold.
¤ Use q to switch between the participants (call swapping £ page 33).
¤ Speak to both participants at the same time (conference call £ page 34)
Accept the call/end the first call
a Press the end call key.
The call is signalled as an incoming call. You can accept the call (£ page 30).
Initiating ringback
If the number you have called is engaged, you can arrange a ringback if your PABX/
provider supports this function.
§§Ringback§§ Press the display key to arrange for a ringback.
Ringback is initiated as soon as the line is free again.
Switching off ringback
If you decide you do not want a ringback, you can switch the function off again.
v ¢ Ç Select Services ¢ Ringback Off
Please note
You can deactivate call waiting while a call is in progress (£ page 36).