Installation Instructions

64
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016
Version 2, 06.08.2010
Connecting the DECT Manager to the local network (LAN/router)
You can find the functions for connecting to the LAN on the Web page:
Settings ¢ Network and Connections ¢ IP Configuration
In most cases, special settings are not required to connect the DECT Manager to the local
network. Your DECT Manager is preconfigured for dynamic assignment of the IP address
by default (
¢ IP address). A DHCP server that assigns the IP address dynamically must
be activated in the local network in order for the DECT Manager to be "recognised".
If the local network DHCP server cannot or should not be activated, you must assign a
fixed/static IP address to the DECT Manager.
IP address type
¤ Select Obtained automatically if your device receives the IP address via a DHCP server
(default setting).
¤ Select Static if your device receives a fixed IP address.
If the Obtained automatically setting is selected, all further settings are automatically
configured. They are displayed and cannot be changed.
If you have selected Static as the address type, you must create the following settings:
IP address
Enter an IP address for your DECT Manager. This IP address allows your DECT Manager
to be reached by other subscribers in your local network (e.g., PC).
The IP address comprises four individual groups of numbers with decimal values from
0 to 255 that are separated by a dot, e.g., 192.168.2.1.