Installation Instructions

Configuring the system on the DECT Manager

Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016

Version 2, 06.08.2010

Configuring a HTTP proxy

¤ Select whether you want to release a separate proxy server in the network for your

DECT Manager.

¤ If Yes , enter the IP address for the proxy server in the Proxy server address field.

¤ The default setting for the Proxy server port is 80. Change this if your server uses

another port.

VLAN Tagging

A local network can be divided into logical subnetworks known as VLANs (VLAN = Virtual

Local Area Network, Standard IEEE 802.1Q). Multiple VLANs share a physical network and

its components, e.g., switches. Data packets from a VLAN are not forwarded to another

VLAN. VLANs are often used to separate the data traffic of different services (Internet

telephony, Internet TV etc.) and to define different priorities for the data traffic.

You can run your DECT Manager and a PC used to configure the DECT Manager on a

separate VLAN. In this case, you enter the VLAN identifiers (VLAN tags) for your VLAN. Your

network operator will supply you with this data.

¤ Select Ye s if you do not want to use a VLAN (default setting No).

¤ Enter the VLAN identifier for your virtual network in the VLAN identifier field.

¤ Select VLAN priority to transfer the PC data.

Caution

If you operate the PC in a different VLAN from the DECT Manager, you will no longer

have direct access to the Web configurator of the DECT Manager from the PC.

Caution

If you enter an incorrect value for VLAN identifier and save the settings, you will no

longer be able to access the DECT Manager from the PC used for configuration. If you

then reset the DECT Manager to a static or dynamic IP address, this will also disable the

VLAN tagging (see Resetting the IP configuration and password, page 23). You will

then need to reinstate the DECT Manager's access to the local network (

£ page 64).