Installation Instructions

68
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016
Version 2, 06.08.2010
The Own Base Station Data window opens to configure this base station.
¤ Enter a unique identifier for the base station in the Name / Location field (e.g., Ground
Floor West). This name should make it easier to assign the base station within the
logical and spatial structure of the DECT network.
¤ Cluster and Synchronization level can be specified later on the Synchronising base
stations page.
The base station status is displayed:
– Offline: The base station is not connected to the telephone system via LAN.
– Deactivated
–Active
– Active and synced
The IP address type is copied from the setting for the DECT Manager on the IP Configuration
page (
£ page 64). You can change the IP address type. The settings for the DECT Manager
and the base stations do not have to match. For example, the DECT Manager could receive a
fixed IP address so that it will always be able to access the Web configurator with the same
address, while the base stations receive their IP addresses dynamically.