Installation Instructions

72
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016
Version 2, 06.08.2010
The Invalid certificates list contains the certificates received from servers that have not
passed the certificate check when establishing a connection, and certificates from the
Server certificates/CA certificates lists that have become invalid (e.g., because they have
expired).
You can remove certificates and download new certificates to the DECT Manager and you
can also accept or reject invalid certificates.
If the connection to a data server on the Internet is not made because the phone does not
accept the certificate received from the server (e.g., when downloading your eMail
messages from the POP3 server), you will be prompted to open the security settings Web
page.
The Invalid certificates list contains the certificate used to make the connection. You can
display information on the certificate by highlighting it and clicking on the Details
button. This information includes who issued the certificate (certification authority) and
for whom, as well as its validity period.
You must use the information to decide whether to accept or reject the certificate.
If you accept the certificate, depending on its type, it is transferred to one of the Server
certificates/CA certificates lists (even if it has already expired). If a server responds again
with this certificate, this connection is accepted immediately.
If you decline the certificate, it is transferred to the Server certificates list with the label
Reject. If a server responds again with this certificate, this connection is rejected
immediately.
Remote Management
If you permit remote management, you can also access the DECT Manager Web
configurator from other networks.
¤ Select Ye s if you wish to Allow access from other networks or No if not.
If you allow Remote Management, this increases the risk of unauthorised access to your
device settings.